How to Reduce Your Saab Key Replacement Cost
You can save a significant amount of money if you get your spare key made prior to the time you lose the one you have. It’s usually 2X-10X more costly to make a new key when you are only left with one.
Switching the battery in your SAAB 9-3 key fob is simple, cheap and simple to do by yourself. Here’s how.
Cost of Replacement Key
The SAAB 9-3 03-11 is a fantastic vehicle, but the ignition key is prone to wear out. The case can become sticky and the buttons are known to fall out, and this could be a major hassle when driving around. This is why it’s important to replace the key fob as soon as you notice any problems. This will save you money in the end and is far better than putting off the replacement.
Replacing the SAAB key fob isn’t too difficult, and you can do it yourself for around $100. You will need to purchase an appropriate shell replacement for your key fob that will work with your car and an entirely new battery. To replace the battery, you’ll have take the electronics off of your SAAB 9-3 keyfob. Once you’ve completed this, you can easily fit the new battery into place and then reset the key fob’s synchronization with your vehicle.
saab 900 key keys that have the remote start feature require special attention due to transponder chips that needs to be programmed for your specific vehicle. To accomplish this, you’ll need an instrument designed for dealers called the Tech 2 or the equivalent to your particular model of saab fob key replacement. This tool can read the code from your keys, and use this information to program your new key. This procedure can be more complex and may cost you up to $500 if you don’t already have an extra.
It is recommended to find an locksmith who works with Saabs. These professionals can make you a key for a lower cost than a dealer. They also provide other services, including key replacement and duplication to ensure you have another key in case yours is lost or damaged.
Most European cars manufactured after 2000 feature immobilizer systems that rely on a chip built into the key to recognize and start your car. These keys are more expensive to duplicate as they contain chip. However, there are some exceptions. For instance, VATS keys (which are mechanical but contain a small resistor value in them) don’t require programming and are relatively affordable to duplicate. However, most post-2000 BMWs, Mercedes, Porsches and Saab vehicles will require a dealer to duplicate their keys. These manufacturers do not permit their dealers to join NASTF. This group makes the tools used by other automotive locksmiths to make replacement keys.
Cost of a New Remote
If you have a Saab car that features keys-less entry systems, it is important to have an extra key or remote. You can use it in the event that the original key gets lost or breaks. The cost of a replacement remote could be very expensive and if you have an insurance policy that includes key add-on protection, then it can reduce the cost.
The majority of car keys produced after 2000 can be programmed by a dealer or locksmith. These keys are usually stored in a tiny EEPROM which can only be read by a computer specifically designed for this purpose. This means that if it is necessary to get a new key for your vehicle you must visit the dealer. The good news is that the dealership will not charge you as much as locksmiths.
Saab 9-3s are stunning cars and many of them are still in operation today. But, there’s a major issue with these vehicles and it’s their ignition key. The key is small and poorly designed, and can easily fall out or become stuck. Many have been without a functioning key in the first few years of purchasing their car.
Luckily, you can get an additional key for your saab key programming and this is a simple process. First, you need to remove the emergency key. This is a simple process that you can perform yourself, and it doesn’t require any tools whatsoever. You will need to be careful, however, because if you force it too much, you might harm the electronics inside it.
You’ll need to find a location where you can get an OEM replacement key case for your saab car key. You may not be able find these cases readily, but if you know where look, you should not have any problem finding one. Once you find an appropriate case replacement you’ll need it cut and programmed to fit your vehicle.
The process of getting an additional key for your SAAB isn’t cheap however it’s worth it in the end. It’s much less expensive than replacing your entire vehicle. It also could save you lots of time. If you have only one key working it is recommended to replace it as quickly as you can. You never know when you’re likely to lose it and this could result in lots of frustration and cost.