fiat 500 replacement key fob (resources)
It may be time to replace the battery if your 500 remote key fob isn’t working. If you do replace the battery but it does not work then the issue could be elsewhere.
At United Locksmith, we specialize in the creation of new keys for old automobiles. We have the tools and parts needed for this job.
Dead Coin Battery
The most common reason your fiat 500 remote key programming 500 key fob will not lock or unlock the doors is due to a dead battery. The coin cell battery in the key fob will deplete quickly when you don’t utilize it frequently enough. If your remote has started to show signs like a loss in range or stopped working, then the battery may be dead.
The battery in the key fob is held in place with metal retaining clips. If the clips aren’t secure, they could cause contact problems that will prevent your remote to receive power. Using a small flathead screwdriver, break the retaining clip open to remove the current battery, and replace it with a brand new one. Make sure that the battery you choose to use has the same voltage, size and specification as the original.
The key fob could also be damaged or corroded by water exposure. Even a quick bath in warm, soapy water could damage the chip. It is best to keep your key fob in a dry environment.
Water Damage
Damage to your water supply could be the cause of your key fob not functioning properly. The rubber seals on key fobs keep them from getting damaged by a slight drizzle or splash of water. However, it’s important to keep the keys from the washing machine, ocean, and even the pool.
The key fob contains an electronic chip which sends an electronic message to the immobilizer system in your car. The chip is what allows the 500 to be locked and started. If it gets wet, however it won’t work.
If you’re trying to determine whether your key fob functional, you can clean the internal electronics using isopropyl or electronic cleaner. It is recommended to replace the key fob when it has been submerged into salt water rather than attempting to fix it yourself.
A replacement fob may cost you a little bit but it’s far cheaper than having to have your Fiat 500 towed to a dealer and fixed there! You can also make it yourself by following a few simple steps. Make sure you have the correct battery type prior to opening your keyfob. This is a job that’s much simpler than it appears, and you can find step-by-step directions online for virtually any key fob for your car.
Faulty Chip
The chip that is contained in the key fob communicates with the car’s immobiliser unit to make sure the vehicle is only able to start when the correct key is inserted. If the chip is damaged or damaged it won’t allow your car to start, no matter what you do.
Water damage or a dead battery are the most common causes of a faulty chip. It is best to leave the task to a professional locksmith, who will be able to replace the chip in a short time and at a an affordable cost.
If your key fob does not work after being exposed to clean rain or tap water, remove the battery. Wipe down the electronic component with a paper towel. If the key fob does not function, there’s a chance that it has an issue with the component and requires to be replaced.
A few people will visit their dealer when they require an entirely new fiat 500 replacement remote key cost fob. However, this can be costly. United Locksmith is the best option for you if need your fiat punto key fob keyfob repaired at a reasonable cost. We have the equipment and know-how needed to repair your fiat punto key key fob in a quick and professional manner.
Faulty Receiver Module
Fiat key fobs transmit a signal up to 50 feet to the vehicle, which allows it to unlock and lock the doors (and start the vehicle for those with automatic transmissions). However there are several things that can cause the fob to stop working. This can be caused by a dead coin-battery, water damage, worn-out buttons, a receiver issue, signal interference or a malfunctioning chip.
If the fob was placed in the pocket that has been subject to severe trauma (such as being dropped onto the hard floor or washed in the washing machine) the fob may not be able to communicate with the Body Control Module (BCM) of the vehicle. This is because the BCM is secured and will only accept a signal from a genuine key and not accept any other.
You will need to replace the fob if this occurs. A locksmith professional can handle all aspects of the replacement process, including programming a new one for your 500. In fact, they can offer you a clone key that functions the same as the original fob (and costs only a fraction of the price).