Bio-Fires – An Eco-Friendly Alternative to Real Fires
Biofires are a warm and cosy method of heating your home without harmful gases or soot. They are simple to set up, just like an electric fire.
The BARDA-funded contract supports development of the BioFire Emerging CoV Panel, a nucleic acid Amplification test to be used with BioFire FilmArray Systems for detecting human coronaviruses that are emerging and known in nasopharyngeal and oropharyngeal sw and saliva specimens.
Eco-friendly
A bioethanol fireplace indoor fire is a great alternative to wood or gas fires. The fuel is made from plant by-products and uses an organic process to convert sugars into alcohol. It has many benefits over other fireplace types that include no harmful emissions and a much less carbon footprint. Bioethanol is a better alternative to other types of fires since it doesn’t emit smoke or soot. It does not require a flue, and can be used in the garden or home.
A multi-drug resistant (MDR) bacteria is one of the most dangerous health threats of our time. Fortunately, new testing techniques can help identify MDR bacteria and other infections earlier to stop further complications. BioFire FilmArray is one of these tests. This test employs the symptom-driven method to identify common pathogens that cause sepsis. The results are accessible within an hour so that doctors can begin treatment immediately.
The process of Molecular PCR amplifies DNA and RNA molecules to millions or billions of copies. This allows for the analysis of small amounts of body fluids or tissues to determine if certain genetic sequences are present. It is a useful instrument for lab professionals and can assist them to diagnose serious diseases in a cost-effective and efficient way. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. It can be used in many environments, including hospitals and laboratories.
In the case for tests for respiratory problems, you can apply a swab of alcohol to your nose before sending it to the lab. BioFire’s technology provides a rapid turnaround time, allowing clinicians to act quickly. This means that there is less waiting for results and better patient outcomes.
The Chanouf Farm Biofire company has developed an agroforestry recycling system that makes use of olive and pear waste to make biochar and biomass power. The products are offered to the general public to replace traditional coal briquettes and charcoal with green alternatives. Additionally they can be used to fuel a Kachelofen fireplace that provides radiant heat that is a green alternative to gas and electric fires.
Clean burning
When you make use of a bio fire you aren’t just saving energy, you’re also helping the environment by using a sustainable fuel source. This is because the combustion of bioethanol doesn’t produce any harmful gases such as carbon dioxide. Instead, it releases heat and water vapour. This makes it a safer and healthier alternative for indoor use.
Ethanol is made from the fermentation of sugars in plants and is classified as an energy source that is renewable. It can be produced rapidly, and it will not be as depleted as fossil fuels like coal and oil. Bioethanol also helps to reduce the dependency on imports from abroad and reduces the risk associated with shortages in supply.
bio ethanol inset fire-fires can be set up easily within existing fireplace openings or as an independent unit. This makes them a great alternative to wood and gas fires. They are a great option for offices and homes that don’t have a chimney.
When a bio fire [have a peek here] is lit, a special media is created inside the burner that absorbs liquid fuel ethanol biofuel fireplace while making it available to be used for combustion. The ethanol is then burned by the flames, and the vapours are emitted out into the atmosphere through the vent. This gives the flames a more natural look and a captivating beauty that cannot be duplicated by wood or gas fires.
Bio-fires are a great alternative to not requiring a vent or flue to replenish oxygen in the process of combustion. They don’t emit the carbon monoxide which is released into the room by gas fireplaces with open fronts.
The BioFire Respiratory panel uses multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This allows doctors to detect and eliminate respiratory diseases much faster than they can through standard lab tests that require patient visits. Both patients as well as the health system gain from this.
Safe indoors
Bio-fires are far safer to use indoors than traditional fires because they release no smoke, ash or carcinogenic fumes. They don’t release carbon monoxide that can be harmful if inhaled. However the bio-ethanol fuel is flammable and you must be cautious when handling your burner and refilling it. It should be topped up only after the burner has been turned off and the flame is cool. Any spills must be cleaned up immediately.
The company’s diagnostic FilmArray system, BioFire Torch and BioFire 2.0–are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration and three additional panels that are approved for use in emergency situations and six environmental test panels. These tests include a respiratory test panel designed to quickly detect and differentiate respiratory illnesses including COVID-19, emerging coronaviruses and COVID-19.
Its COVID-19 panel has been awarded a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense’s Strategic Access Program. The COVID-19 system is based on antigens and allows doctors to differentiate symptoms caused by COVID-19 from other respiratory infections. This test has a similar accuracy as the antigen tests that are rapid and are currently being used.
In addition the company is in the process of developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids test for amplification will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens from saliva and nasopharyngeal samples in less than a half hour. The test will be developed within the shortest timeframe, and FDA approval for EUA and the 510(k) is expected to be granted in Q3 2020.
Bio-ethanol fireplace fuel flame effect fires are safe to use but should be kept away from objects that are combustible, such as curtains, pillows and blankets. They should not be placed near anything that can catch fire. Keep all flammable items away from the flame-effect fires by at minimum 10 feet. The bioethanol fire fuel should be stored in a dry, secure location that isn’t easily accessed by pets or children.
Simple to use
A bioethanol fireplace is simple to install and has no flue to worry about. All you need is a safe location to place it in and some fuel. Once you have filled the burner with fuel, light it. This will ignite an appearance of a flame like an actual fire. After the flame has been ignited it will heat the room but with minimal or no smoke. It also produces a lot of heat, just like a wood-burning fire would. Bio fires are also easy to maintain and don’t require any servicing, just the odd clean-up.
Unlike most rapid tests however, the BioFire RP2.1-EZ test uses an syndromic approach to detect the most common signs of infection and returns results within 45 minutes. This test is designed for patients with upper respiratory symptoms and has a 98% sensitivity rate. The test can detect up to 19 bacteria and viruses in a single sample which makes it a good option for the treatment of patients.
The BioFire system integrates multiplex PCR testing, sample preparation, and reporting of results into one integrated platform. This allows laboratories to streamline their workflow and eliminate the need for a serial method that involves sending out individual tests. This can lead to better outcomes for patients by allowing the correct test to be utilized first time, and also by removing the need for costly culture-based tests. Additionally, the BioFire system can identify pathogens and their antimicrobial resistance genes on an molecular level, providing data that is more precise than conventional methods.
Molecular diagnostics are increasingly being used to improve the care of patients and outcomes. The BioFire panel RP2.1+ utilizes an syndromic approach to simultaneously focus on 23 pathogens that are commonly implicated in respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems and delivers results within 45 minutes.
The test is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD demands are met. The BioFire Defense team has also created a fully automated sample-to-result assay for the rapid identification of COVID-19. The test is currently in development and will be available once initial DoD demands are met.