Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as aluminum or timber.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you’re doing everything you can to ensure that your windows are in good repair.
Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you’ll need to locate some plastic spacers that will help the new pane to fit perfectly into the frame of the window.
If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.
Once the glass is removed from the window, it’s best to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the distance between the door and the window repair near me is significant, you may prefer an alarm system that includes windows. This will provide the best of both.
2. Sagging
Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of problems including sliding. A sagging window can cause problems with light, draughts, and even security. It’s important to take action when you realize that your uPVC windows are sagging.
To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you’ll need open the window so that you can get to the frame. After that, using the screwdriver, you’ll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and test it for an appropriate fit. If you’re satisfied with the fit of the window, tighten the screws to secure them in place.
If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it’s essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.
UPVC handles can also loosen. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. It’s fairly simple to repair a loose upvc window repair near me handle. First, you’ll need to close the window and then perform an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn’t, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
If you’re waking up to wet floors and mouldy walls each time it rains, it’s important to take action. The leaks of water from windows do can not only cause degradation of your home’s structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to ‘over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.
It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme cases, you may need to replace the window.
Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window repair near me. The fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to keep in mind that if the leak originates from the glass of your double glazed window repairs near me glazed windows, it’s more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical component, hinges can be damaged over time. It’s very simple to replace a hinge on a window but it’s much easier if someone helps you to hold the frame.
It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.
The issue could be caused by opening the window improperly or a faulty installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to give advice.
It is also crucial to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by several different things. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. The interlock, which is on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a good clean, but in some cases it might be necessary to have them replaced.
The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.
Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help keep cold air out and keep your home warm and cosy!
With a little maintenance and repair windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you have any problems with your Upvc window, it’s best to consult an expert as soon as you can.