UPVC Replacement Door handles for doors
The handles for upvc windows on your doors are worn out with time and require to be replaced. It is crucial to match the dimensions of the handles that were previously used when replacing them.
The three measurements to be inspected are the top screw’s location, lever and key hole sizes. Use the size guide to help you.
Inline Lever/Lever
A lever/lever handle is a modern door handle designed to work with new or replacement doors. This type door handle is offered in a variety of styles & finishes. This handle is offered by a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are made of sturdy materials and are perfect for multi point lock doors that require a heavy duty design. The old aluminium window Handles are inline, and they use the same spindle and screws to fix them. They can be easily mounted on any uPVC/Composite doors.
The sprung lever design allows the handle to be placed and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200 000 cycles. This helps ensure that the finish is of high quality and performance over time. The sprung lever can also be shortened to fit a wider range of locks. This is particularly beneficial for narrower door frames in which the cylinder is further back. A lever that is shorter can be used on doors with latches that can be opened by the thumb inside.
Lever Pad
A Lever Pad upvc door handle operates differently than lever handles that are found on the majority of doors. These handles are operated by a single spindle or by two spindles inline or offset. They are typically used on UPVC double glazed doors. They come in a variety of styles and styles.
The handles have been tested to a minimum of 200k cycles and are available in various finishes like White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.
All of the UPVC lever pad styles for handles are supplied with the spindle and screws that allow them to be put on a new or existing uPVC door. The backplate fixing centers of 211mm allow for a larger size window handle replacement that is often a benefit in replacing a defective or worn multi-point door lock mechanism. These handle levers have a spring, which solves the problem of door handles that sag out of their horizontal position when not in use.
It is essential to ensure that the PZ dimensions of both the multipoint lock and the uPVC doors when choosing a replacement upvc door handles spindle and handle. This measurement can also be referred to as ‘handle centres’ or cylinder centres’. It is important to match the correct handles.
Once you have decided on the correct size of PZ it is important to make sure that the push and lever pads are shaped to match the American with Disabilities Act compliant handles that you need for your door. These are typically round or square, with an internal lever and an external push pad.
The majority of UPVC Lever Pads that we sell are spring-loaded. This means they return to a horizontal position after not in use, rather than hanging and possibly sticking in the frame. This stops draughts from entering the property. It is also the case that the majority of UPVC lever pad handles are handed which allows you to place them on either side of the door.
Euro Cylinder
Cylinder locks are typically used on uPVC doors, but they can be utilized on other types of doors. They work by using a key that unlock a cylinder case that is then revealed with pins that can be aligned with the pins in the lock body and allow them to rotate an revolving cam, opening the door. Euro Cylinders can be fitted with up to six pins, with both internal and external doors usually having different levels of security.
The choice of cylinder is vital. It’s dependent on the type of use your doors and handles receive. External doors, for instance, should be fitted with cylinders with greater security while internal doors can be secured using an ordinary cylinder. Certain cylinders are equipped with additional features that can increase security, such as anti-drill or anti-bump properties.
A euro cylinder needs to be measured correctly to ensure that it is the right size for your door. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn if there is one. It is best to do this while the lock is in place however in the event that this is not possible, you may remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon could be vulnerable to attacks such as lock snapping, so it is important that it is not too long.
The majority of modern cylinders have been designed with bump and anti-drill features included in their design. These features are designed to minimize the chance of a attack by forcing the cylinder rotate in a different direction. This will help to prevent attacks and protect your doors.
There are also cylinders that are made to withstand snapping. This is a common attack on cylinders. A specific tool is used to break the lock’s break line and then the front of cylinder is snapped off. This is a quicker and more convenient method of gaining access than a multipoint locking system. It also leaves no evidence of the break-in which could make it difficult to prove insurance claims.
Spring Cassette
The spring cassette is positioned within the base of your patio door handle with lock handle’s backplate, providing a spring solution and returning your multipoint lock handles to their normal position after usage. There was a time when handles didn’t have a spring built into them, and as a result, they are more likely to slide or ‘drop’ once the locking mechanism is disengaged. This simple component is the most effective way to fix this problem. It also helps prevent your upvc door from becoming stuck in either the closed or open position as they are difficult to close manually.
These spring cassettes were designed to be used with sprung multipoint lock. They will not fit unsprung handles and you’ll need to cut a hole in your backplate for them to fit. (Please check the image for a technical diagram). They are a replacement for existing damaged or missing cassettes inside the backplate of the door handle for many kinds of uPVC doors. They feature a square cut out which allows for an 8mm spindle to be used and are sold as a set.
These spring cassettes are a great value for money way to fix the problem of door handles that are that are sagging. They are simple to put in and will prolong the lifespan of your uPVC doors. Contact us for more information about our selection of uPVC accessories and spares. We are on hand to assist you and offer professional advice.