Ghost Immobiliser 2
Protects your vehicle against key cloning, and stops thieves from driving the vehicle using original keys. Our latest immobiliser connects to your vehicle’s data network, CAN, and a unique PIN code must be entered for the engine to start.
Ghost, unlike trackers, doesn’t emit radio frequency signals, and therefore cannot be detected by diagnostic tools. Also, it doesn’t have any LED indicators or buttons that can give away its presence within your van or car.
Anti-key Cloning
The Ghost immobiliser was designed to prevent key cloning. This device connects to your vehicle’s CAN data network and creates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and steering wheel. This prevents the thief from being capable of starting your car. If the wrong PIN code is entered, the engine cannot be started and it will be impossible for them to drive away with your pride and joy.
A ghost immobiliser uses new technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or stolen the local ghost immobiliser installer immobiliser is an invisible electronic device that can’t be detected by common thieves, as it doesn’t emit any radio signals and works silently.
This next-generation immobiliser can protect your car from a variety of threats, including key hacking relay attacks, key-hacking, and cloned copies. It also stops a thief adding a key or replacing your ECU since it will not allow them to start your car without first entering the correct PIN.
Unlike other immobilisers, the ghost immobiliser 2 does NOT require any additional remote or key fobs in order to operate. It can be deactivated using an app on the driver’s smartphone. This makes it ideal for those times when you have to hand your car over for valet parking or for servicing without the key fobs.
The autowatch ghost installers Ghost-II represents the latest version of the Ghost immobiliser. It is designed to be easy and convenient to use, while still being as secure as it can be. This is done by linking the Ghost-II into the vehicle’s data network CAN, which means that there are no wires to hide or be easily located. It has built-in features that allow you to deactivate the Ghost-II simply by connecting it to your vehicle’s Bluetooth.
OBD port hacking
OBD port hacking is the latest technique used by professional car thieves. Thieves are able to access your vehicle’s OBD by using the help of a laptop, mobile application, and cables that can be purchased online for less than PS50. Once they have access to your vehicle’s OBD port, they can do whatever they like from setting fault codes, and tuning your car to taking your joy and pride away in less than a minute.
It will protect your car from being stolen by requiring a specific PIN code to be entered with your key fob before you can start the engine or leave. It communicates with the vehicle’s ECU (Engine Control Unit) by using the CAN Data Circuit. This is undetectable by any scanners for RF or code grabbing. It also includes a Service/Valet mode that allows your vehicle to start without the need for a PIN.
To use an OBD hacking device you must have a laptop that has software capable of reading the OBD protocol. These can be bought for less than PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins which are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable has to be connected to the wiring harness of your car, such as the radio wiring harness.
Once the hacker gains access to the OBD port on your vehicle, they will send diagnostics to the system using high baud rates, which will crash the car’s CAN and prevent the systems from working. This could cause your car’s engine to stop or shut down.
No remotes or keys required
The car immobiliser is a great piece of anti-theft technology utilized by millions of modern vehicles all over the world. An aftermarket immobiliser protects your vehicle through the use of engine ECU software that stops cars from starting when a false transponder is transmitted.
However, it is easy for thieves to bypass an immobiliser system if they have access to the code to deactivate it. A burglar could easily remove the battery from many key fobs by squeezing them open. They could then employ an easy tool to take out the internal circuit board from an immobiliser and replace it with a blank. Then, they will be able to start your vehicle.
With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser connects to the engine ECU (Engine Control Unit) through a discreet quiet CAN data circuit that is unnoticeable with diagnostic tools such as those employed by high-tech thieves. It does not also utilize a traditional key fob with LED indicators, meaning it’s not visible in plain sight.
There will be occasions where you have to disable autowatch ghost installation walsall Ghost 2’s auto-protection for example, when you are doing the valet parking or service work. The ghost CAN immobiliser comes with a specific mode for this, called ‘Service Mode’ which can be activated with just pressing an app on your phone. The car can still be operated however its maximum speed will be restricted to 36 mph for added security.
Contact us today to schedule an appointment to see our workshop. A member of our team will run through a full breakdown of how the system works and will provide you with owner’s manuals, installation certificates, ghost installers near me (visit the following website) 2 emergency card and security guarantee.
Simple PIN code change process
Ghost is the next-generation device that secures your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle’s CAN data network, and a personal PIN code is programmed into it by pressing buttons on your steering wheel and dash. The device doesn’t emit RF signals, therefore it is not able to be tampered with. This makes it impossible to detect by sophisticated scanning and RF techniques employed by modern thieves.
The PIN code can be altered to block earlier drivers or include an override number if you forget the sequence. The installer will guide you through the process to do this during installation. The system has a valet-mode feature that can be used to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without knowing the code. This is a great choice for those who don’t wish their pin sequence to be divulged, but wish to leave their car with valet parking or service.
Ghost is an unobtrusive system that utilizes the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone. There are no additional LED indicators are thrown, and your car will be protected without any chance of being disabled.
Tested for every vehicle
A ghost immobiliser, unlike key fobs that require you to press buttons, is discretely installed under the dash or on the steering wheel. Only you will know it’s there. The device is connected to your car’s CAN data networks and a personalised PIN code is programmed into it using existing buttons on your vehicle. The system will not allow your vehicle to start until this code is entered. This means that thieves can’t duplicate your keys or access the OBD port to gain access to your vehicle.
Ghost can be utilized in all vehicles that use electric vehicles, vans, motorhomes and bikes. It’s also incredibly versatile and can be programmed to turn off in various scenarios. It can be programmed to go into Valet mode, for example when your vehicle is transferred to a valet service or parking company. This allows you to drive your car within a 30mph speed limit, and the ghost immobiliser will start to activate itself when the vehicle returns to your possession.
The device can also be reset at any time to your personal PIN code. This is a great option if you lose the code, or in the event that the device becomes unusable.
It’s also worth noting that the device is unnoticeable to anyone who isn’t familiar with it. This is because it runs through the buttons on your car’s dashboard and steering wheel, and utilizes the information they send to recognise which button has been hit. This makes it a completely secure and reliable security system that can’t be tampered with by RF scanning, jamming or door lock pick sets.