How to Fix a Dead kia Key fob programming Cost Picanto Key Fob
The Kia Picanto was built for the city. It zips through traffic gaps which larger cars aren’t able to and breezes through width restrictions like they aren’t even there. It’s a compact vehicle with lots of features.
There are a myriad of reasons that your kia replacement key Picanto key fob may not be working. The most frequent reason is an inactive battery.
Dead Coin Battery
The most common reason that a Kia Picanto key fob stops functioning is a dead battery. Usually, the key fob will show warning signs prior to it dying and loses range or erratic behavior. It is best to replace your battery when you notice any of these signs before the battery fails completely. Make sure to use a replacement kia key fob battery that is the same size, voltage and specifications as your original one.
If the key fob not working, you may need to take it to a dealer. Only then can you ensure that the replacement key fob will be compatible with your vehicle, and correctly programmed. If you attempt to program the key fob in error the internal chip may be damaged and it will cease to function.
A receiver module that has developed a fault is an additional possibility. This could be because of a chip that has been damaged or weakened, or wear and tear. Symptoms of this problem can be difficult to detect but it’s important to determine the cause as soon as possible. If your key fob is not working, or the spare is not working, you should contact a dealership for help. They’ll be able to pinpoint the problem and fix it.
Faulty Chip
The key fob comes with a chip inside it that sends signals to the computer in the car. If the chip becomes corrupted and the code cannot be properly transmitted and the immobilizer will activate. This can be caused by a number of reasons. One of the reasons is low battery levels in the key fob. Another possibility is water damage. If the fob gets wet, it is very likely that it will stop working.
A malfunctioning chip could be the cause of a Picanto key fob not turning on the engine. If you’ve replaced the battery, reprogrammed it and then inserted the fob, and it doesn’t function the circuit board may be damaged. It is necessary to replace the circuit board in this case.
Press the button on the back to open the fob. Once you have done this, you are able to take off the mechanical key. The video below will guide you how to replace the battery on the key fob. Be sure to use a new battery with the same voltage and size. The Fob could be damaged if you use the wrong type battery. After replacing the battery you should test it by pressing the lock button. If it works then you’ve got a fantastic Fob.
Faulty Receiver Module
Your key fob isn’t durable and can take a lot of abuse. Over time the batteries’ contacts and buttons of your key fob might be damaged. It’s fortunately, it’s fairly easy to fix this on your own using a few tools.
The fob must send a message to the receiver inside your car in order for it to work. If this module is faulty the fob won’t be able to open or start the vehicle. There are several different possible causes for this issue but the first step to do is reset the fob.
This is accomplished by disconnecting and letting the 12 volts battery drain completely. Then, reconnect the positive and negative cables in reverse order.
If the battery is working and the fob does not have water damage, it may simply have an issue with its signal. It could be due to many reasons, including interference from nearby transmitters as well as objects that operate on the exact same frequency band as the Receiver of Picanto.
Key fobs come with rubber seals that prevent the electronic chip from becoming wet. However should they be submerged in water, the chips could be damaged. It is essential to keep your key fob clear of the water and only use key fobs that have waterproof designs.
Programming errors
Kia Picanto’s key fob makes it easy to start and unlock your vehicle. You can also use it to control your vehicle’s features. It is important to know how to use the key fob properly, especially when driving in adverse weather or when you have a limited mobility. There are a number of Kia Picanto key tricks that can assist you.
If your key fob suddenly stopped working, it could be a problem with the internal chip. This is a rare event, but it is possible. To determine the problem, it is best to consult a Kia dealer.
Alternatively, you can try to reset your Picanto key fob. It’s a simple process and can be accomplished at home. The first step is to remove the key fob from the ignition switch. Connect the diagnostic device under the dashboard to the OBDII connector and start the engine. The diagnostic tool will ask for details about the Picanto. This includes the VIN, make, and model.
You can also test the battery for a dead coin battery. The metal retaining clips inside the key fob are designed to hold the battery in place and complete the circuit. If the retaining clip is not secure it could interrupt the flow of electric current, resulting in a loss in functionality.