Choosing Upvc Window Replacement Hinges
Selecting and fitting upvc windows hinges for replacement isn’t as difficult as you may think. Check that the hinges’ arrows face in the correct direction, and measure the thickness of the hinge arms on the opening frame (13mm or17mm).
There are many different types of hinges to choose from, each one with distinctive features. This article will focus on the most commonly used kinds of uPVC double glazing window hinges hinges, and their benefits.
Egress/Easy Clean Hinge
These are a great choice to replace upvc window hinge or upgrade your fire escape safety windows as they open to a full 90 degree angle. They can be closed to an easy-clean position that allows you to see the windows’ exterior without having to climb ladders or lean at risky angles.
Yale is one of the most reputable and well-known brands in the world of home security. These hinges are suitable for any kind of uPVC side-hung windows. By pressing a small button the window sash can be slid to the side, and then into the clean position. After closing, the sash will automatically return to its original position.
They are available in 13mm and 17mm stack heights. Use our Egress Selection Guide to help you select the best product for your window.
These hinges are designed to work with a standard side-hung frame that is made of aluminium or uPVC. They are equipped with an easy friction screw that can alter the amount of resistance that is generated. This makes it easier to open the window and reduces the possibility of an accidental closure during severe winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
There are no buttons or catches the Nico Egress Easy Clean Friction Hinge is simple to use and offers a practical solution to emergency egress as well as safe cleaning. Use the hinge retention clip located in the inner corner of the bottom corner. This will release both the catches on the top and bottom and allow you to move the sash into the clean position. Once it is in the easy-clean position, close the window to return the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges, often known as “Easy Clean” hinges are used to replace side-opening windows to allow egress (fire safety) reasons. These hinges permit an opening larger in the event of fire. The building regulations state that this kind of hinge should be placed in any space that is habitable and has windows.
They have an exclusive friction stay that allows the window to be opened to 90 degrees and allows the opening sash to slide across when it is open to allow easy cleaning of the external side of the glass without having to use ladders. The hinges have no fiddly buttons or catches, and are operated by a simple, secure lever that can be accessed from inside the home.
The hinges are made in the UK by Cotswold and come complete with a child safety restrictor for use throughout the day which can be turned off with a hidden button providing you with peace of mind that your children will not accidentally open the door too far. They are available in 13mm and 17mm stack heights.
To order these hinges, simply measure the length of your current side-hung window hinge that attaches to the frame (see the article on measuring your upvc window hinges). Then, select the appropriate size hinge from the options below.
Note that this measurement is taken at the hinge’s point that is attached to the frame, not the sash. The actual hinge length could be shorter or longer dependent on how the old windows were manufactured. When choosing the size of the hinge, most frames made of changing upvc window hinges will have with a height of 13mm however if your previous window frame measures 17mm, then select this option. Alternatively you can fit the 4mm packer to make up for the difference. All hinges are in two different directions (1 left and one right). Screws are not included with the hinges. They can be purchased separately if needed. We suggest using our upvc pvc window hinges hinge repair screws. These screws are designed to increase your hinges’ performance and allow them to work smoothly for longer. They feature a less friction design, and an improved weather seal with a new nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open a window fully. These child safety hinges help to overcome this issue and offer a fantastic solution when ventilation is required but access for cleaning or escape in the event of fire is not feasible. They limit the possibility of opening the sash, and permit the override of this limitation by pressing an appropriate button. They are available in 13mm or 17mm stack heights and are suitable for top and side-hung windows.
The Nico Restricted Egress friction hinges for timber windows Hinge blends the features of a standard restrictor and a fire escape hinge to provide an efficient and easy way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It comes in two pieces with one hinge being the one with restricted egress and the other hinge being unrestricted. This permits one hinge to be installed at the bottom and the other hinge is placed on top.
These uPVC hinges are restrictive and have been tested to BS6375 Part 2. They are intended to be used on windows that isn’t able to be fully opened, like a small children’s bedroom. The mechanism limits the extent to which the sash is able to open to 100mm for safety and re-engages once the window is closed.
These uPVC hinges with friction can be used with all types of windows. They are particularly useful for windows that are hard to reach, such as those in three-storey apartments or those which would require ladders. They can be complemented by our security features like hinge guard protection plates or dog bolts for PAS 24 performance.
It is important to measure the hinges on your window to ensure that you get replacements that are the same size. This can be accomplished by looking through the image gallery of the hinge before deciding the best place to put it. Top hung hinges can be restricted on both sides and the side hung hinges are restricted on one side.
Standard Hinge
Standard hinges use metal-to-metal connections and do not require additional parts to help reduce friction. It is available in a variety of finishes and also has a fire rating. For a quick way to determine the radius of your hinge put it on its flat surface and align the quarter and dime in two corners. If the quarter is more snug, then the corner should be turned to 5/8 inches.
The right hinge can make or ruin the appearance of your door. It’s important to match the finish and style of your door to the hinges to create a unified design that is both practical and visually appealing.