Autowatch Ghost II Immobiliser Installation
Ghost immobilisers are among the most advanced features in vehicle security. They are groundbreaking in the way they protect your car from hacking, key-cloning and even wheel jacking.
The system requires the correct PIN code to start your car. This is accomplished by pressing the buttons on your dashboard or steering wheel.
TASSA Approved
The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a revolutionary device designed to fight recent criminality trends, such as key hacking and cloning. This smart system can connect directly to your vehicle’s CAN data network, stopping your vehicle from being driven or started without the proper code. The system is completely undetectable and does not make use of radio frequencies or key fobs. Instead, it allows you to create your own unique sequence of PINs using buttons on your dashboard or the steering wheel, which you are able to modify at any point. You can create a PIN up to 20 presses long to ensure maximum security and a secure emergency code is available too.
The system communicates with the vehicle’s CAN data network in order to detect when the PIN is entered. This is then sent to the vehicle, which disables the ignition, engine and shuts off vital components like the starter motor as well as the fuel pump. The system features a “valet mode’ that lets you deactivate it, preventing valets and employees from driving your car without the correct key.
Contrary to conventional immobiliser relays that can be deactivated using easily accessible diagnostic tools for professionals, the Ghost device relies on the onboard data network to communicate with the ECU and cannot be altered with. It’s a sealed device and therefore, it is impossible to listen in to the circuits. This makes it impossible for thieves to hear that distinctive clicking sound that traditional immobilisers relays emit.
This technology is also not vulnerable to jamming devices utilized by high-tech thieves. Furthermore, since it works on the CAN data network, it’s unaffected by other diagnostic tools. This makes it the perfect anti-theft solution for any modern vehicle.
Once you’ve booked your TASSA approved ghost 2 immobiliser, we’ll set up an appointment and time to visit your place of business or home to complete the installation. We’ll run through a full demonstration with you. We’ll will then provide you with an owner manual as well as an emergency card and two autowatch ghost installers midlands window stickers as well as an installation certificate.
Insurance Approved
The Ghost is an aftermarket security device that shields your vehicle from the kinds of thieves who would be interested in stealing your car. It works by stopping the engine from starting when a certain sequence of buttons is pressed. The sequence is only understood by you, so when your car is broken into thieves, they will not be able to start it and will likely leave your vehicle alone in fear of being found. The ghost has a’silent’ mode that shuts down the vehicle when it is not in use. It can be turned off by pressing the button.
The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it will be recognised by a few insurance companies as an additional security measure for your vehicle. It can be used in conjunction with other Thatcham-approved security measures, like trackers to help protect your vehicle from being taken. This gives you peace of mind.
Additionally, the system communicates with your vehicle’s ECU using the CAN data circuit, which makes it undetectable to diagnostic tools and completely silent. This means a thief can’t simply insert a new key or swap the ECU how to install ghost immobiliser get around the Ghost. The system will only allow your car to start if the correct pin code is entered. This unique pin code is only available to you & can be changed at anytime.
The Ghost is an immobiliser that can be incorporated into any vehicle without the requirement for additional key fobs or wiring. It is directly connected to the vehicles data network CAN and an individual PIN code you choose is programmed into it by using existing buttons on the steering wheel and dashboard. This code prevents the vehicle from being started unless the correct sequence has been chosen first. If the code is guessable there are emergency codes which can be reset with your mobile phone. There is an application that can be used on iOS and Android to eliminate the requirement of entering pins every time, providing more security.
The shrewd
An immobiliser system, unlike a GPS tracker, which only aids you locate your vehicle after it’s stolen, prevents the vehicle from ever being stolen in the first in the first place. It does this by preventing the engine from running until it receives the correct code through the key fob, or a smartphone app that is downloaded to it. This is the best way to stop wheel jacking as well as other types of theft as the person who steals your car has no choice but to leave your car in peace or risk being caught.
The ghost immobiliser, which is a tiny weatherproof device, is tucked away into the wiring harness of your car. It is concealed and has a connection with the CAN data network. This means that thieves can’t detect it or disarm it by cutting wires. The system also comes with a service mode which can be enabled to allow your garage to work on your vehicle without needing to know the passcode in order for it to start.
After you’ve had the device fitted to your vehicle, you’ll be able to arm and disarm it using your smartphone by using its specialized app. You can even change the PIN code at any point to ensure that only you have access to your vehicle. This is beneficial if you’re planning to sell your car in the future since it can increase its potential resale value.
Another advantage of the Ghost immobiliser is that it’s discreet and won’t leave any marks on the car’s body which makes it a great addition to any vehicle. It’s easy to install, operates quietly and won’t interfere with any other systems in your vehicle.
An immobiliser that is discreet will improve the look and feel your car. This is particularly beneficial for those who use their vehicle to transport valuable items since it will stop potential thieves. A ghost alarm installation immobiliser will work alongside any other anti-theft technology such as a tracker to provide unrivalled security for your vehicle.
Low Maintenance
bmw m2 ghost installer immobilisers work by connecting directly to the CAN data network. They are almost invisible, since they don’t use LED indicators or additional key fobs. It doesn’t emit radio signals, and is silent, meaning that thieves won’t hear it. The device can be concealed in a variety of locations (even beneath the floor mats) and is a great choice for those looking to protect their car without sacrificing aesthetics.
This device stops you from starting your car until you have a unique password. This is accomplished through the combination of buttons on your dashboard and steering wheel in a particular sequence. This makes it impossible for thieves to copy or hack into your system, and will prevent the vehicle from starting.
Thieves can also attempt to increase your signal to gain access to your vehicle, however the local ghost installer will detect this and stop your vehicle from starting until you enter the correct disarming sequence. Contrary to other security systems that can be activated through entering the wrong code or entering the wrong code, the Ghost will keep preventing your vehicle from starting until you type the correct passcode.
The Ghost will remain in service mode until you turn it back into “service” which is activated by pressing the same combination of buttons as you used to arm it (this can be done when you go to your dealer to perform maintenance or warranty work). This is to ensure that it is not taken away by anyone who is not authorized and then rearmed and returned to service mode when it is needed.
It is also possible to transfer your Ghost to a new vehicle if you switch vehicles during the course of ownership, as long as the new vehicle is compatible with. The latest version of Ghost comes with QR finger prints that are linked to the International Security Register. This means that if you ever find your Ghost stolen to replace parts, it will be traced back to you and your vehicle. This can deter criminals from stealing cars with Ghost since they’ll know that the vehicle is secure and they could risk getting caught and arrested.