Tips For Replacing a Window Handle
It is easy to replace your window handle from the convenience of your own home. Follow these steps to ensure a smooth and beautiful finish.
Begin by removing the screws to expose the screws within the uPVC window handle. Measure the spindle to make sure you are getting the correct size replacement.
1. Determine the length of the Spindle.
It’s important that you get the spindle size right when replacing the window handle. It can affect the tightness or looseness of the handle as well as whether the handle will lock correctly into the frame of the window. The spindle is the steel shaft that connects the handle and the lock in the frame of the window. The spindle could be a standard industry 8mm cross-section or the earlier 9mm versions. The modern industry standard is 8mm however this was not always the case. When buying a new handle it is essential to verify the dimensions.
The easiest way to measure the length of the spindle is to remove the existing handle, this can be done by turning it into the open position and then removing the two screws (which might be hidden behind plastic caps that will need to be removed) that retain the handle. Once the handle is removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements required to buy a replacement.
There are many options available when it comes time to choose the right window handle. From sleek chrome that fits in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or the more traditional Tudor Cottages with curled mongoose tail latches. The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are commonly fitted to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles from Cadenza are different in size because they feature an angled blade that functions with a multi-point locking mechanism within the window.
When you are choosing a handle for your window, you should also consider the hand you use to open your external door handles and locks. Inline double glazed window handle handles aren’t hand-operated and can be used for left or right handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Take the handle off
A window handle that falls out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. However, the good news is that replacing a uPVC window handle is a very easy job that you can do yourself. You only need a few basic hand tools and some time to complete the task.
First, you must open the window, and then ensure that it’s not locked. Then, remove the screws that hold the handle in position. After the screw caps are removed then you’ll be able to take off the handle.
The handle is attached to a spindle within the window frame. The handle is fixed by screws or pins dependent on the kind of handle. The most common handles are the inline Espagnolette and the cockspur handles. Both of these kinds of handles are utilized on casement windows, as well as windows made of aluminium. They can be locked using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.
To take the handle off, you will require a flat-bladed screwdriver. After this is released, the handle will slide off the spindle. Once the old handle is removed, you will have to determine the length of the spindle to ensure that your new handle is compatible with the spindle’s length.
Once you have determined the correct size for the handle, you can screw it into the correct position. You must make sure that the new handle is firmly secured and that it is turning the correct way (clockwise for open and counterclockwise for closed). It is also crucial to check that it isn’t installed upside down.
Replace the screw caps. After you’ve done that, you can test the handle to ensure that it functions properly. You can also test the locking system by moving the handle from an unlocked position to the locked position and back.
3. Remove the Screws
A uPVC window handle is an integral element of any home and is often the first item to show signs of wear and tear or damage. It can be caused by natural elements or by frequent use, and sometimes intentional damage caused by criminals who may want to open a closed window to gain access to your home. However, a simple replacement is a simple solution and stop the problem from happening again.
UPVC handles may also be difficult to open if the locking mechanism isn’t working correctly. Often, the problem can be resolved by replacing the multipoint lock instead of the entire handle. It’s certainly worth checking this since it can save you money.
After you have removed the handle, you’ll have to remove any screws that held it in place. These are typically located on the inside of the handle base. It could be necessary to use a screwdriver to accomplish this. Be careful not to over tighten the handle as this could cause it to loosen.
Then, you’ll have to find the pins or screws that hold the handle in place. They will likely be found on the inside of the base of the handle. you’ll need either a screwdriver or pair of pliers to remove the screws. If you’d like to replace them, you can do so by replacing the caps on the screw and test the handle to make sure it is working correctly.
If you’re ready to put in the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it into the appropriate position. Make sure that the handle is in the open position and that any screws are tightly fixed before replacing the screws’ covers, if you wished to do this. Once you’ve completed this, you’re all done and you can enjoy your newly replaced window handle. This will hopefully help you avoid costly window and Door Handles Victorian replacements in the future. Contact us if you require more information on this or any other aspect of your uPVC window.
4. Install the new handle
Whether you’re replacing a broken handle or simply updating it, the process is surprisingly simple and can be completed in just a few steps. The key is to identify the kind of handle, measure its spindle, and determine what tools you will need to complete the job. Safety is always the primary priority when working with windows and tools. Take your time to follow the steps and ensure that you have a handle that is safe for use.
The first step is to locate the screws that hold your current window handle in place. Then, remove them, while keeping an appropriate grip on the handle itself to prevent it from crashing and causing injury. After the screws have been removed, you can place them in a safe location to be replaced in the future.
After you have removed the handle, you can now begin installing your new handle for double glazed window. It is important that the handle fits perfectly to ensure it works properly and locks the window in place. Then move the square metal bar attached to the handle into the window mechanism hole.
After the new handle is in place, the final step is to replace the caps on the screws and test it to make sure it works. If you’re not satisfied with the results or if the window does not open and close as it should then the next step is to call our experts who will be able to assist you.
The majority of homes in the UK have uPVC windows and as they are, a lot of them will need to be replaced at some point due to damage or wear. Anyone with some DIY expertise can complete the task. It is essential that the handle you choose is in line with the style and size of the window. If you’re unsure about what kind of handle you’ll require, don’t hesitate to reach out to our team, who will be able to provide you with the choices available.