Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning and immobiliser bypassing.
The system is hidden within the wiring loom of your vehicle It is inaccessible to anyone looking. It is created by generating a pin code push sequence by using buttons already on the steering wheel doors, door cards and the center console.
No circuit cuts
It’s not surprising that owners are concerned about protecting the vehicle they’ve put so much effort into buying. However, traditional security devices like alarms and wheel locks can easily be cut off or taken over by thieves. Ghost immobilisers are very effective and efficient solution that operates in silence and can’t be recognized by modern day thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the vehicle’s ECU via buttons already on the steering wheel, dash and door panels, to create an individual pin code that you only are aware of. The code can be altered at any time and can include up to 20 digits depending on your preferences. It also has an emergency code that you could use in the event of forgetting your PIN.
The ghost immobiliser can be used to block a relay box from transferring your car key’s signal from within your home, which could unlock the doors and start the vehicle. It also blocks sophisticated methods to steal your vehicle, including OBD port hacking. The device is tiny, weatherproof and difficult to spot. It’s also hard to alter.
Another benefit of the audi rs4 ghost installer immobiliser is that it can be fitted in your car without any permanent marks. It is ideal for people who plan to sell their car in the near future. It’s also faster and easier to install than a factory-fitted unit.
The Autowatch Ghost is a groundbreaking next-generation device that blocks contactless stolen cars by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN. It is a discreet device that can be installed without cutting wires and doesn’t require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA certified and is linked to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are safe from theft.
No scanning by RF
You will want to protect your vehicle from theft when you have spent lots of money and time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will prevent your vehicle from beginning until you enter an individual code. You can create a 20-digit pin using the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your vehicle. You can also set up a valet or service mode that allows you temporarily to start your car without entering the PIN code. This will permit technicians to work on your vehicle, without being present. This is an excellent option for those who want to reduce time and make their life easier.
Ghost immobilisers are new generation device that connects to the vehicle’s CAN data network and utilizes the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to be discreet without any LED indicator or noise to signal it and can be placed anywhere on your vehicle without disturbing the aesthetics of your beloved vehicle.
This stealthy system has been approved by TASSA and could lower the cost of insurance. It has a tracking function that can locate your vehicle, even if it’s stolen. This is helpful if you have a rare or expensive vehicle that you have invested a lot of time in making it your own.
The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your vehicle remotely in the event you forget your PIN or are not able to enter the vehicle due to a reason. This feature is ideal for those who need to take your kids to school or run errands, but don’t want to put yourself at risk by letting having someone else drive your vehicle. It’s also useful when you have to take your vehicle to a mechanic for maintenance or repair.
Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, which makes it inaccessible to thieves who use RF scanning or code grabbing technology. It is also able to safeguard your car from key cloning and ECU swapping which are the most typical methods of theft from cars.
No key to cloning
Ghost immobilisers are an excellent way to safeguard top-end vehicles and stop key cloning. They prevent your car from starting until an additional PIN code is entered in conjunction with the normal key fob. This makes it more difficult for thieves to steal the vehicle, and can stop them from trying. This is a great idea if your vehicle has been extensively customized or if it is an uncommon model.
These immobilisers are linked to the vehicle’s CAN data network and are completely hidden, which means their presence isn’t obvious. It is also impossible for a burglar to locate the device using radio frequency scanning or code grabbing technology. This means that a criminal must spend longer to take your car.
To bypass the system, thieves need to know the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as often as you want. The pin code you select is easy to remember, however, it is mathematically impossible for anyone else to decipher. The engineer will also provide an emergency pin number in the event that you forget the pin.
The ghost 2 immobiliser fitting near me CAN Bus immobiliser is able to be easily mounted anywhere on your vehicle. It can be used with any vehicle and can be completely customized to match your vehicle’s appearance. It is also extremely affordable and easy to use. The device can be moved to a different vehicle, provided that it is compatible with the new vehicle.
The immobiliser for the CAN bus is compatible with a number of other security features. It can, for example detect damage to the vehicle and alert the owner. It can also stop the engine in the event that the car is tampered with. The system can protect your vehicle from hacking and key duplication. It can also detect vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moving.
No OBD port hacking
ghost installers near me uses an immobiliser hidden in the module that is connected to your vehicle’s CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, turn off the key fob, and then code new keys. This technology is a step up over the methods that were used by thieves to steal vehicles in the past. The CAN data network also means that your system will not be affected if you disconnect or change your battery.
The Autowatch Ghost is the world’s first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking and theft of replica cars. It does not use LED indicators or key fobs, instead using the buttons on your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that needs to be entered prior to when you can drive your car away.
Modern thieves utilize diagnostics to identify circuit breakages in your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn’t require additional wiring, and can’t be detected by professional diagnostic tools. It can be even installed on vehicles equipped with anti-theft systems.
A Ghost immobiliser comes with a major advantage: your vehicle will only start by someone who knows your PIN code and has physical access to your vehicle. This is an advantage over security systems that can be bypassed by simple screwdrivers or cable tampering.
If you forget your PIN you can reset it easily with the emergency PIN override function on a cell phone or computer. This is helpful if you want to start your vehicle after leaving it in a garage or with the valet parking service.
The Autowatch local ghost installer (learn this here now) 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It has an RFID fingerprint system that can identify parts that are not in use, which allows for the return of stolen items if they are discovered. It can also be turned into a service mode’, which allows the engine to start when your vehicle is parked in a garage or if you have valet parking, but you will need to enter your PIN code again to exit the vehicle.