Fiat 500 Key Fob Replacement
If your 500 key for fiat 500 fob doesn’t work Try using a different one to see if the car will recognize it. If it does, the issue is likely with the original fob’s battery or water damage.
First, replace the battery. Make sure the new coin cell battery is properly inserted with the “+” side facing downwards in the fob.
Dead Battery
Most of the time when a fob’s not working, it’s just because the battery is dead. It’s easy to fix, and most fobs give you a warning if the battery is low. You can find instructions for most car fobs on YouTube or in the owner’s manual. You can also take it to a local locksmith or the dealer who sold it to you to repair it.
Sometimes, a fob will cease to function, and it could be an issue with the internal circuit board. It’s rare however it can occur. The internal chip can be damaged if you drop the fob onto something that is hard. This could also happen if you use an aftermarket key and the fob won’t function. In this case it is essential to go to a dealer or locksmith to have the key reprogRammed so that it works with your 500.
One 2012 Fiat stilo key 500 Flip Key Remote that resembles Ilco brand with trunk, lock and lock buttons. This is a new keyless entry remote (will require cutting and programmed by locksmith)
Damaged Chip
fiat 500 key button replacement 500 key fobs are wireless devices that transmit signals to the car when you press the button. It is equipped with a microchip that contains details about the code required to connect with your car. If the chip is damaged, it will not transmit the correct code, and the car will not start. It is possible to repair this kind of damage, and a locksmith can assist. United Locksmith is capable of providing this service for old models as well as more recent ones, so don’t hesitate to call them. scared to contact them.
You can purchase a brand new fob and have it programmed professionally by a locksmith. This is much cheaper than going to the dealer and will function just as well. Locksmiths will require specific details from you, like the year in which your vehicle was manufactured and the name of its model.
If you are not sure how to program fiat 500 key fob to fix this problem you can try scratching the chip with an US dollar bill. The copper on the bill is abrasive enough remove dirt and oxidation, however, it won’t cause damage to the microchip. The chip might not be repairable when it’s physically damaged. This can happen when you drop it, run it over with your vehicle or other form of physical stress.
Water Damage
Whether you accidentally dropped your keys in the pool, threw them in your bag while swimming at the beach or splashed them with water on a rainy afternoon, it’s likely that your fob will suffer from water damage. Even if there’s only an ounce of water on the key, it could cause serious problems to the electronic components of the key.
The good news is that it is possible to solve this issue by removing the fob’s key and then using the paper towel to cleanse it of any remaining water or dirt. After the fob is dry it is possible to replace the battery and it should start working normally.
You can also take it to an auto shop or locksmith to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob functions with your car’s computer.
If the key fob of your Fiat 500 stops working, you might feel angry and overwhelmed. You may be tempted to go to the dealer have your key fob replaced however this could be expensive and unaffordable. A locksmith can replace your key fob, without having to visit an establishment. This is why they are a better choice than a dealership.
Pairing Issues
If you drop your key fob or it stops working and nothing else appears to be problem It could be due to the chip has gone out of sync. This could be due to water damage or a dead battery, or it could just be that you need to reprogramme it.
This can be accomplished by following the steps in your owner’s guide. If you’re having difficulty or your manual isn’t working then you should hire an automotive locksmith complete this task. This ensures the chip isn’t damaged and is likely to be the most affordable solution.
Some 500 owners have also reported that their keys will not lock their cars. This could be a major issue if you’re driving to an gas station to fill up. Some owners have reported the locking mechanism on their 500’s failing and having to replace the entire intermediate shaft for steering. This issue has been reported in a technical service bulletin (TSB) from Fiat.
If you’re having issues with your Fiat car, an experienced locksmith can assist. They’ll be able to duplicate your key, or create new keys that lock and start the car. They’re able to do this without seeing your old key and are generally much less expensive than purchasing it from a dealership.