UPVC Replacement Door Handles
The handles on your doors wear out with time and require to be replaced. In this case, it is essential that the new handles for patio doors are in line with the critical dimensions of the handle that was previously used.
The top screw position the lever, and the keyhole size are the three measurements you need to verify. Use the size guide to assist you.
Inline Lever/Lever
A lever handle or lever is a modern-day door handle that is designed to fit new or replacement doors. This style of handle is available in a variety of styles and finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are constructed of durable materials and are ideal for doors with multi-point locks which require a robust design. The handles are inline, and they utilize the same screws and spindle to fix them. They are easily fitted on a new or existing uPVC/Composite doors.
The handle can be adjusted and angled to accommodate the needs of all users. The handle has been tested for endurance up to 200,000 cycles. This helps to ensure that the finish is of high quality and performance is maintained over time. The lever that is sprung can be shortened to fit more locks. This is particularly useful in doors that are narrower, where the cylinder is situated further away from the door. A shorter lever is an excellent option for doors that have latches that can be activated by the thumb turn located on the inside.
Lever Pad
A Lever Pad door handle made of upvc operates differently to the lever type handles found on most doors. These handle types can either work off one single spindle (inline) or independently from each side by using two offset spindles or inline (pad). They are typically used on UPVC doors with double glazing and come in a range of finishes and variations.
The handles have been tested to at least 200k cycles and are available in several finishes, including White, Silver, Chrome & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle an outstanding performance and durability for its intended use.
All UPVC handle lever pads include a spindle and screws and can be mounted on the uPVC door. The backplate fixing centers of 211mm allow for a larger size of handle which is often a benefit in replacing upvc window handles a defective or worn multi-point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of handles hanging out of their horizontal position when not in use.
When selecting a replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement is also known as the ‘handle centre’ or ‘cylinder centres which is a crucial aspect to match the right handles.
Once you have the correct PZ size you will then have to ensure that the handle lever pads and push pads are of a suitable shape for the American with Disabilities Act (ADA) compliant handles that you need for your doors. They are typically round or square, with an internal lever, and an external push pad.
The majority of UPVC lever pads that we offer are sprung, which means that they return to their horizontal position when not being used, instead of hanging out and possibly sticking in the frame. This keeps draughts out of the property. It is also the case that the majority of upvc door handles replacement lever pad handles are handed that allows you to put them on either side of the door.
Euro Cylinder
Cylinder locks are usually used on uPVC doors, but they can be utilized on other types of door. They work by using a key that unlock a cylinder that then reveals pins which can be aligned with those inside the lock body, allowing them to turn an revolving cam, opening the door. Euro cylinders are available with up to six pins. Internal and external doors require different levels of security.
The choice of cylinder you choose is vital. It is based on the type of use your doors and handles will receive. External doors, for example should be equipped with cylinders that are more secure and doors inside can be secured with a standard cylinder. Certain cylinders are equipped with additional features that can improve security, like anti drill or anti bump properties.
A euro cylinder should be properly measured to ensure it is the right size for your door. The cylinder needs to be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, in the event that one is present. It is recommended to do this while the lock is in place however if this is not possible, you may remove it to measure. A cylinder that is protruding beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, therefore it is essential that it’s not too long.
The design of many modern cylinders includes anti-drilling and bump resistance features. They are designed to minimize attack chances by forcing the cylinders to rotate in a new direction. This will help to prevent attacks and protect your doors.
There are also cylinders that have been constructed to resist snapping. This is a common occurrence on cylinders. A specific tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a much faster and easier way to gain access than through a multipoint locking system. It also leaves less evidence of the burglary which could hinder insurance claims.
Spring Cassette
This spring cassette is located within the base plate of the door handle. It is a spring-loaded solution to help return your multipoint lock handles back to their normal position after use. There was a time when handles of this kind did not have a spring built into them and without this they tend to droop or ‘drop’ once the locking mechanism has been disengaged. The addition of this simple element is among the best methods to correct this issue and is an effective way to keep your doors made of upvc from getting stuck in an open or closed position, since they aren’t always easy to close manually.
These spring cassettes are specially designed to be used with sprung multipoint locks, they will not fit unsprung multipoint window handles and you must have a bespoke hole cut into your backplate in order for them to fit (please check the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplate of the door handle for numerous kinds of uPVC doors. They have a square cut out which accommodates an 8mm spindle and are sold as a set.
These spring cassettes are a great value for money way to fix the problem of your door handles that are sagging. They are simple to install and will extend the life span of your uPVC doors. For more information on our range of uPVC spares and accessories you can get in touch with our team. We are on hand to help and happy to provide professional advice.