Ghost Immobiliser Installation
Add a ghost immobiliser to your car and protect it from car thieves. Our TASSA certified system guards vehicles against hacking, key cloning, and immobiliser bypassing.
The system is hidden inside the wiring loom in your vehicle and is inaccessible to anyone looking. It works by creating pin code push sequences through existing buttons on the steering wheel, door cards and the centre console.
No circuit cuts
It’s not surprising that car owners are keen to secure the vehicle they have put so much effort into buying. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser is a very effective and efficient solution that operates in silence and can’t be identified by modern thieves.
Ghost immobilisers or a hidden device, is a device that connects with your vehicle’s data network CAN to turn off the engine. It does this without using key fobs or radio frequencies. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only known by you. The code can be changed at any point and can be as long as 20 digits long depending on your preference. It also includes a secure emergency code that you can use should you forget your PIN.
The ghost immobiliser can also be used to stop relay boxes from transmitting the car key’s signal inside your home, which could open the doors and begin the vehicle. It could also block the latest techniques of stealing your car such as OBD port hacking. The device is small and weatherproof, which means it’s hard to spot and even harder to tamper with.
Another advantage of the ghost immobiliser is that it can be put to your vehicle without permanent marks. It’s ideal for those who plan to sell their car in the near future. It is also much quicker and easier to install than a factory-fitted unit.
The Autowatch Ghost is a groundbreaking next-generation device that can stop vehicles that are stolen through contactless by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN code. This is a snoopy device that can be put in without wires being cut and does not require any additional key fobs. It also connects to the original ECU of the vehicle, which prevents thieves from bypassing it with a new key. This system is TASSA certified and can be connected to an International Security Register, allowing owners confidence that their vehicles are protected against theft.
No scanning by RF
If you have invested lots of time and money into the customisation of your vehicle, you will want to protect it from theft. One of the best ways to do this is to install an immobiliser, which will prevent the engine from starting until you enter a unique PIN code. You can create a 20-digit PIN using the buttons on your dashboard and steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet and service mode that will allow you to temporarily start your vehicle without entering the PIN code. This will allow your technician to work on your car without you being there. This is a great option for people who want to cut down on time and simplify their lives.
A ghost immobiliser is a next-generation device that connects to your vehicle’s CAN data network and utilizes the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to blend in with the rest of your vehicle, since it doesn’t emit any noise or light indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy device is TASSA approved and could reduce your insurance costs. It also has an ability to track your vehicle that allows you to locate your vehicle even if it’s been stolen. This is especially useful if you own a rare expensive car which you’ve invested a lot of effort customizing.
The autowatch ghost installers midlands Ghost can be used together with an iPhone app to enable you to start your car remotely if you forgot your PIN or not able to enter the vehicle due to some reason. This feature is perfect for when you have to pick up the kids or go on errands, but don’t want the safety of someone else driving your car. It’s also useful if you need to take your vehicle in for servicing or repair.
Another benefit of the Ghost is that it doesn’t transmit or detect radio frequency signals, making it unnoticeable to thieves who use RF scanning or code grabbing technology. It can also protect your car against key cloning and ECU swapping which are the most common methods of car theft.
No key cloning
Ghost immobilisers are a great way to protect high-end cars and prevent key copying. They prevent your car from being started unless a PIN code is entered along with the standard key fob. This makes it very difficult for thieves to steal the vehicle, and could deter them from attempting. This is a good idea in the event that your vehicle has been heavily customized or if it is an uncommon model.
These immobilisers are linked to the vehicle’s CAN data network onboard and are completely hidden meaning their presence isn’t obvious. It is also impossible for a burglar to identify the device using radio frequency scanning or code grabbing technology. This means that a burglar would need to take longer to steal your vehicle.
To bypass the system thieves must know the unique pin code and the location of the ghost Immobiliser installation Near me. But, the pin code will be specific to you and may be changed as many times as you want. The pin code you select is easy to remember but mathematically impossible for anyone else to decipher. The engineer will also have provided an emergency PIN code in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It is compatible with any vehicle and can be fully customizable to match your car’s appearance. It is also extremely affordable and simple to use. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.
The CAN bus immobiliser is also compatible with many other security features. For instance, it could detect the damage to your vehicle and warn the owner. It also can stop the engine in the event that the car is damaged. The system will safeguard your vehicle against hacking and key duplication. It also detects vibrations or contact with the vehicle. It will also notify the owner if the vehicle is moved.
No OBD port hacking
Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief hacking in to disable your alarm, turn off your key fob and create new keys. This technology is a major improvement over the methods employed by thieves in the past to steal your vehicle. The CAN data network ensures that the system won’t be affected by disconnecting or changing your battery.
The Autowatch bmw x5 ghost installer, the first non-detectable immobiliser for CAN bus in the world, guards against key-cloning, hacking, and replica car theft. It is not equipped with LED indicators or key fobs, instead using the buttons in your steering wheel, centre console and door panels to allow you to create a unique PIN sequence (up to 20 button presses) which must be entered prior to when you can drive your vehicle away.
Modern thieves use diagnostics to detect circuit cuts in your vehicle. They are able to bypass immobilisers that require a lot of wiring or are incorporated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not detected by diagnostic tools of a professional. It can be used on vehicles with anti-theft devices.
Another advantage of the Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your car. This what is a ghost immobiliser a major advantage over traditional security systems that are able to be bypassed using cable manipulation, a screwdriver, or a universal remote controller.
You can easily reset your PIN if forget it using the emergency PIN override feature of your mobile or computer. This is useful if are looking to start your vehicle after having left it in a garage, or with the valet parking service.
The Autowatch ghost alarm Installation near me 2 is the latest generation of the product, and is approved for insurance by TASSA when installed by one of our authorised installers. It comes with the QR fingerprint system to allow individual parts to be identified which allows the return of stolen parts in the event that they are found, and it can be set to’service mode’ that will allow the engine to start when the vehicle is in a garage or with a valet parking service however, you will need to enter your PIN code to get out of the car.