Ghost Immobiliser Installation
Add a ghost immobiliser your vehicle to protect it from car thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning and immobiliser bypassing.
The system is hidden within the wiring loom of your vehicle It is inaccessible to anyone looking. It operates by creating pin code push sequences through existing buttons on steering wheel, door cards, and centre console.
No circuit cuts
A car is a precious item that takes many years of effort to acquire, so it’s understandable why owners want to protect their vehicle from theft. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers are a extremely effective solution that works in a quiet manner and can’t be recognized by modern day thieves.
A ghost immobiliser 2 immobiliser is a hidden device that connects to your vehicle’s CAN data network to disable the engine, without the use of radio frequencies or key fobs. It communicates with your vehicle’s ECU by using buttons on the steering wheel, dash, and door panels, to create a unique pin code that you only know. The code can be changed at any time and can contain up to 20 numbers based on your preferences. It also comes with a secure emergency code you can use should you forget your PIN.
The ghost immobiliser could also be used to stop a relay box from transferring the signal of your car’s key from within your home, which would unlock the doors and then start the vehicle. It could even block high-tech methods of stealing your vehicle, such as OBD port hacking. The device is tiny and weatherproof, meaning it’s difficult to see and is also difficult to alter with.
The ghost immobiliser comes with a further benefit: it can be fitted to your vehicle without leaving any permanent marks. This makes it ideal for those who are planning to sell their car in the near future. It’s also quicker and simpler to install than the factory-installed system.
The autowatch ghost immobiliser fitting Ghost is a groundbreaking next-generation device that blocks theft of cars using contactless technology by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN. This is a stealthy device that can be installed without wires being cut and doesn’t require any additional key fobs. It can also be connected to the vehicle’s original ECU and prevents thieves from gaining access to it using an additional key or replacing the ECU with the use of a “relay”. This system is TASSA-certified and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicles are protected from theft.
No scanning by RF
If you’ve invested lots of time and money in the customization of your vehicle, you will want to safeguard it from theft. One of the best ways to do this is to install an immobiliser. It will prevent your engine from starting unless you enter a unique pin code. You can create a 20-digit pin by pressing the buttons on your dashboard and the steering wheel. This will ensure that only you are allowed to drive your vehicle. You can also create a valet and service mode that will allow you temporarily to start your vehicle without entering the PIN code. This will permit the technician to work on your vehicle, without being present. This is an excellent option for people who are looking to reduce time and make their lives simpler.
Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle. It uses the buttons on the dashboard and the steering wheel to program a PIN code. It is designed to blend in with the rest of your vehicle, since it doesn’t emit any noise or LED indicator. It can be installed anywhere on your vehicle, without affecting the aesthetics.
This stealthy device is approved by TASSA and can reduce your insurance costs. It has a tracking feature that allows you to locate your vehicle even if it’s been stolen. This is particularly useful if have a rare or expensive vehicle that you have invested a lot of time in customizing.
Autowatch Ghost, in conjunction with the iPhone app, allows you to remotely start your vehicle if you have forgotten your PIN code or are unable to access your vehicle. This feature is ideal for when you have to pick up the kids or run errands but don’t want to risk someone else driving your vehicle. It can also be helpful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.
Another advantage of the Ghost is that it doesn’t transmit or detect radio frequency signals, making it inaccessible to thieves using RF scanning or code technology to capture codes. It is also able to protect your car from key cloning and ECU swapping as well as other typical methods of theft from cars.
No key to cloning
Ghost immobilisers are an excellent option for protecting high-end automobiles and are designed to prevent key cloning. They prevent your car from being started until a PIN code has been entered in conjunction with the regular key fob. This makes it difficult for thieves to steal the vehicle, and could deter them from attempting. This is an especially good option if you’ve invested an enormous amount of time and money making your vehicle unique, or own a rare or expensive model.
The immobilisers are connected to the vehicle’s CAN network and are completely concealed, meaning their presence isn’t obvious. It is also impossible for a thief to detect the device by using radio frequency scanning or code grabbing technology. This means that a burglar will need to invest longer in order to successfully steal your car.
To get around the system, a thief must be aware of the pin code and the location of the Ghost. The pin code is unique to you and you can alter it as many times as you need to. The pin code is simple for you to remember but mathematically impossible for anyone else to figure out. In addition the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you ever forget the pin.
The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It is compatible with all vehicles and fully customisable to match the look of your car. It is also extremely cost-effective and simple to use. The device can be transferred to another vehicle, if it is compatible with the new vehicle.
The CAN bus can be used with other security features. It could, for instance, detect damage to the vehicle and alert the owner. It also can shut down the engine if the car is damaged. The system will protect your vehicle from hacking as well as key duplicate. It can also detect any vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moving.
No OBD port hacking
Ghost uses an immobiliser that is hidden and connected to the CAN data network in your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and generate new keys. This technology is a step up over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing the battery.
The autowatch ghost immobiliser fitting Ghost, the first non-detectable CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key-fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) which must be entered first before you can drive your car away.
Modern thieves utilize diagnostics to identify circuit breaks in your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated in the wiring. The Ghost is weatherproof, does not require additional wiring and isn’t identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.
A Ghost immobiliser comes with a major benefit: your car can only be started by someone who knows your PIN code and physically has access to your vehicle. This is a major advantage over traditional security systems that can be bypassed by simple modification of cables or a screwdriver.
If you forget your PIN, you can reset it with the emergency PIN override function on a mobile phone or computer. This is a great option in the event that you have to start your car when it’s left in a garage or at the valet parking service.
The Autowatch ghost tracker installation 2 has been accepted for insurance by TASSA and can be installed by our authorized installers. It has the QR fingerprint system to allow specific components to be identified, which will allow the return of stolen components in the event that they are found, and it can be switched into ‘service mode’, which will allow the engine to start when your vehicle is in a garage or with valet parking however you have to enter your PIN code in order to get out of the car.