peugeot 2008 key fob 208 Key Replacement
Peugeot 208 key replacement is best left to auto locksmiths with experience who have the appropriate equipment and technical know-how. They can program and create keys faster and cheaper than a dealership.
A dead battery for your coin is most likely to blame the reason your key-fob stops locking or unlocking the doors. There are other reasons that the key might be malfunctioning.
Dead Coin Battery
A dead battery can stop your Peugeot 208 from locking and unlocking, and also stopping it from starting the engine. If this is the case, you’ll need to use the backup starting method that’s described in the owner’s manual to your vehicle.
Another reason why your 208 may not start is that the spark plugs are been damaged. The spark plugs are responsible for igniting the fuel that ignites the engine. However they have a short lifespan. If they are not used enough they will eventually fail.
Luckily, there’s an easy solution for this issue. The best way to solve this issue is to test the voltage of your car battery using a multimeter. If it’s below 11.5 Volts it is time to replace it. It is also necessary to clean the contacts of the battery when it has corrosion. This can be done by taking off the rubber covers from the two terminals of the battery, and then using a wirebrush to remove any damaged parts of the battery. Then, reconnect the positive and negative pole cables.
Water Damage
If your 208 won’t start and the battery has not been replaced, you must inspect the spark plugs. It could be that they’re dirty, which causes them not to spark. The spark plugs can be cleaned in an workshop.
Peugeot cars use keys that are transponder-type and integrates with the car’s immobiliser system. This ensures that only the correct key is able to turn the engine. If the chip inside the peugeot boxer replacement key key is damaged, it will not transmit the proper signal to the vehicle.
Water damage is a frequent cause of this problem. This is a common problem in colder climates where the vehicle is exposed to snow or rain. If this is the case, you should get in touch with a reputable locksmith who has all of the tools and equipment needed to modify the new key. They will also have the latest technology and machinery needed to create a Peugeot smart key. The process shouldn’t be more than 15 minutes.
Contacts with the battery may be damaged.
Peugeot changed from the old carbon-encased transponder chips to a brand new kind of chip that utilizes electronic components that are placed on a circuit board. This new technology works great when it’s new, but over time the circuit boards begin to deteriorate and stop working properly.
This can prevent the immobiliser from activating so your vehicle won’t be able to start. If this happens it’s a good idea contact a Peugeot specialist or locksmith.
A common problem is when the battery in the key fob starts to fail. This causes the blade of the key to stop feeding into the lock. A locksmith for cars will replace the battery, and then cut a new blade for you. This is a simple fix.
Faulty Receiver Module
If your Peugeot key fob isn’t working after dropping it on the ground, being exposed to a sudden downpour or accidently washing it may be due to a faulty receiver module. The receiver is responsible for transmitting radio frequency signals to the onboard computer, which controls the central locking system inside your Peugeot vehicle.
The rubber seals on the key fob keep water from reaching its electronic chip. However prolonged exposure to water can cause damage to these seals and the chip. Submerging the key fob into sea water at the beach or throwing it into the water can be particularly damaging due to the high salt content.
If your Peugeot spare key fob doesn’t work You’ll need the module replaced. This can only by done by an peugeot 308 key fob replacement specialist or an expert auto locksmith. As opposed to other cars, Peugeot keys are protected by an immobilizer that is unique and requires the correct programming to begin the engine. This is the reason that you should only trust an authorized Peugeot locksmith to design and program an alternative.
Faulty On-Board Computer
The on-board computer in your Peugeot is responsible for many of the systems within your car, ranging from airbags to power windows. If something goes wrong with these systems, it’ll typically display a code indicating the problem. The code is stored in the system until the issue is fixed. Usually, this will mean replacing the computer on board.
The most common reason for the airbag warning light to come on is corroded or loose connections within the sensor. This could be due to wear and tear, aging or exposure to moisture and salt. It is essential to have this issue addressed as soon as you can, as an airbag that is not functioning properly could be risky in the event of an accident.
If you notice an error message stating that the card is not found on your Peugeot key fob, the battery in the key fob might be weak or dead. This could prevent the key fob from transmitting a signal that will disable the standard immobilizer in your vehicle. Test this by pressing the unlock key on the fob’s key and then trying to start your vehicle. If this fails it is because the battery of the key needs to be replaced.