fiat 500 keys 500 Locking Wheel Nut Key
Locking wheel nuts are fitted to protect you from theft of your car’s wheels. They’re not foolproof however, they make it difficult for thieves to take the bolts and nuts that are standard.
They work on a very simple principle, employing a keyed head with a matching pattern (similar to the way locks for doors work). Only the correct nut/bolt fiat punto key fob can undo these.
Replacement
These locking wheel nuts are fitted to a variety of alloy wheels that are found on fiat van keys 500 models and they can be a powerful security measure against theft. They are difficult to remove without a special key and even then, it’s not particularly easy. If you’ve lost your keys, or it’s broken, there are several things you can do. One option is to check the car manufacturer’s website for a replacement code and order a new key online. This can be a quick and easy solution, and it is usually less expensive than buying one from a main dealer.
You can also ask your friends who have the same car to assist you in finding the correct replacement. There are only a handful of different locking wheel nut designs used by manufacturers, so there’s a chance that someone else with a similar car model might have a key that is compatible with your lock. Be aware that this method is only suitable for basic locks that have a fixed collar, not a high-end locking nut from McGard.
The last alternative is to locate a spare wheel bolt key from your breakdown company or motor factor. They are made from the same material as the wheel brace nuts and are used in times of need. Remember to loosen your wheel nuts only partially before you jack up your vehicle.
If you have a spare key, it’s worth keeping it somewhere safe. Perhaps in your glove compartment or in the lock wheel-nut storage bag if you have one. Keep a pen or a note nearby to write down the code on the key’s back. This will make it easier for you to purchase a new key should you lose it.
Lost
It’s a huge trouble if you lose your locking wheel nut key. You have a few choices. The first is to contact the manufacturer and request the new lock. Each lock set has a code which allows you to purchase an upgrade directly from the manufacturer. You may be able to find this code in your owner’s manual or in the service book.
Another option is to try and recall the last time you removed your wheels. The key is typically found in a small plastic box or bag that contains the wheel nuts. If you’re lucky the garage that performed the work might have left the key with them.
You can also make use of a wheel brace to test if the locking nuts grip. But don’t apply too excessive force. The key for the locking nut is designed in the same manner as the lug nuts and features a hole on the opposite end that is able to fit into a wheel brace. By hammering the socket into the locking nut, you might be able to pull it away enough to take it off by hand. This isn’t a good idea however, since the lug nuts can be damaged by heat.
Damaged
The Locking Wheel Nut Key” can be used to remove four security bolts or nuts that are designed to deter theft. They are placed on the wheels of the Reprogram fiat replacement key fob 500 Key Fob (Norman-Jakobsen.Mdwrite.Net) 500. (The remaining 3 or 4 normal nuts can be removed with a normal wheel ratchet). The ‘Locking Wheel Nuts’ are equipped with an outer security pattern, or an ‘indent’ that can only be opened with the correct tool, thus making them a powerful deterrent to wheel theft. It is important to remember that trying to remove the ‘Locking Wheel Nuts’ without a key can cause cosmetically damaging or structural damage to your alloy wheels. (It could also be risky and may even invalidate your vehicle insurance policy). Genuine replacement fiat 500 key ‘Locking Wheel Nut Keys’ directly from the manufacturer.
Repaired
It is crucial to know where to locate the locking wheel nut. Most modern cars come with them. It could be stored in a garage if you’ve had a repair done and they’ve removed one of the wheels. It could be hidden inside your car’s boot or under the seat, or in the boot.
It’s a huge trouble to lose the locking wheel nut key, especially if you don’t have any spares. You can get one from a dealer, but this will be expensive and if you don’t have your code they won’t be able help. You can also check with the local breakdown business. They may have a kit which will work, but it will cost you.
There are methods to remove your wheels without the locking wheel nut, but it’s not a good idea. It’s much easier to simply buy a new set of locks if you are able to afford it.
The design of locking wheel nuts is different from standard lug nuts. They require sockets that have a similar design to remove them. They are designed to be very difficult to remove and, hopefully will deter thieves from taking your wheels.
The most common design of locking wheel nut has an “keyed head”. The key of the locking wheel fits into this and slots into the flange design to release it. Some have a rotating collar designed to rotate around the nut. This makes it difficult to use the socket wrench. Some cars have wheel nuts instead of lugnuts, and they can be difficult to remove without the right tool. Some even have a shear bolt that will break off if it’s removed with the incorrect tool.