Replacement Upvc Window Handles
Most replacement windows handles made of upvc include everything you need. However the handle you had previously was secured by screws or pins, they will need to removed. Then, remove the’snap-in’ cover on the base of the handle.
The next step is to identify the type of window and lock your new handle for It is essential!
Espag
Espag handles are a multipoint lock system that can be installed on casement windows, such as uPVC and double glazing made of wood. The handle is fitted with a 7mm square shaft that fits inside an internal gearbox that is mounted on the uPVC window. When the handle is turned it triggers a series of locks around the window’s perimeter. Espag handles are also referred to as shootbolt handles and provide additional security when compared to the conventional single point lock that is found on older window frames.
They are available in a number of different styles, such as inline and cranked handle designs that can be used in left or right-hand operation. There is also various sleek ergonomically designed handles that are designed to improve both the feel of the handle as well as how it looks on your windows.
If you are looking to replace your current uPVC window replacement handle with an espag handle, you will be required to determine the dimensions of the spindle that is fitted and measure this from the base of the handle to ensure you order the correct replacement. This measurement, known as the step height will help you choose the perfect uPVC window handle for your home.
If you need to remove any screws that are holding the handle, you can use pliers or a screwdriver. Once this is done, you will need to take the handle apart by removing the screw or pins that hold the spindle and then pulling it away from the window and door replacement.
Once you have the handle removed, you will then be in a position to access the locking mechanism within the frame of the window. You can then remove the wedge block cockspur that is attached to the handle to allow the window to open. The new uPVC handles you have ordered should be able to slide over the cockspur block before sliding into the handle spindle, allowing the window to reopen. If you want to be sure that your uPVC handles are properly secured you should replace the cockspur block with a brand new one.
Cockspur
Cockspur handles are generally found on older uPVC and aluminium windows. The handle closes and turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) The handles are available in lockable and nonlockable versions. They are available in a variety of different nose heights to suit the frame.
The handle locks using a thin spur (little triangle bit) pulling up against a plastic wedge that is fixed to the frame. These are usually one-way handles, however a locking deadlock is a possibility to add additional security.
As with Espag handles, the Replacement double Glazed windows handles for cockspur handle are simple to put in place All you require is a new set of screws (supplied) and the proper backset. The backset is measured from the baseplate to the underside nose of the handle. In general Aluminium window frames typically use a 9mm backset while UPVC utilizes a 21mm. There are a myriad of variations though so it is important to take a measurement before purchasing the handle (see the video below for more details on how).
This type of window handle can be changed by simply removing the existing handle and removing the spindle, or in certain instances, the entire handle assembly. The replacement windows near me handle can then be screwed into place with a pair of pozidriv screws. The pozidriv screws come in a brass or zinc finish to match the existing hardware, and there is the possibility of a self-locking version.
This is an easy to install replacement for the cockspur handle that is ideal for repairing or replacing old uPVC windows, they have a universal design which makes them suitable for all profiles and backsets. Each handle comes with 3 packers that vary in thickness. They are fitted to the underside of the handle’s nose and can be arranged in different ways to achieve backsets of 9, 13mm, 17mm and 21mm. These handles are available in left and right-handed versions, as well as locks and non-lockable versions. They are also available with a variety of nose heights.
Tilt and Turn
The top European window style with tilt and turn has been around in Europe for a long time, however it’s only just beginning to gain popularity in the Americas. They combine the functionality of three different window styles into one – tilt, pivot and in-swing. This makes them ideal for older homes as they can be used to provide a greater level of ventilation than traditional window types.
When tilt and turn windows are closed, they are locked like any other fixed window. But, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened upwards and the window will tilt in order to allow air circulation through the gap at the top of the frame. This is a great solution to allow ventilation without having to open a large window, which can be a safety risk if it is not secured properly when opening.
If the handle is turned another 90@ or 180@ the sash can be fully opened, much like doors. This allows for full air exchange, which is particularly useful in draughty rooms or houses where smoke or other odors can build up. This allows you to easily clean the glass’s outside, as you can do it from inside your home. This is a job that often requires a lot of risk.
Tilt-and-turn windows are also very safe. When locked in the closed position they are difficult to open from the outside, and they have double seals that stop rainwater from entering the house when in the tilted or in-swing position. This can be a particularly useful feature for older homes, where burglars are more likely to target windows that can be opened via the side hinges.
Spade
There are a few different types of window glass replacement near me handles that can be fitted to upvc double glazed windows. There are two main kinds of handles: Cockspur and Espag. Other options include tilt and turn handles, spade or blade handles as well as monkey tail handles, and various other kinds. The type of handle that you pick will be based on your preferences as well as the kind of windows you have.
You must know how your current handle is attached to the frame to select the appropriate replacement upvc handle. This is known as handing. It is an essential piece of information, especially when buying online as some handle styles don’t work with all windows. For instance, certain handles for cockspurs are angled, whilst others are straight and either turn left or right. You will also need the spindle’s size that is the distance between the base of handle and the handle’s head.
Another crucial aspect of selecting the right handle is knowing whether your windows require a restrictor or not. These are usually used in high-rise apartments or commercial buildings, but they’re not required for the majority of homes. Also, take into consideration step height, which is the distance from the bottom of the screw plate to the top of the handle.
Spade is a word that comes from Old English spadu or spaedu and has been translated into various languages, including German spaten and Low German Spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. Since then spade has become an emblem of African American pride and heritage.
It is important to get the right size when replacing a handle made of Cadenza. Handles are available in straight and angled styles that differ by just a few millimeters. The handle head can vary between a D and T shape, or have no handles at all.