Choosing Upvc Window Replacement Hinges
It’s not as difficult as it might appear to select and install upvc window hinge replacement replacement upvc door hinges hinges. It is essential to verify that the arrow on the hinges is facing the correct way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.
There are many different kinds of hinges, each having their distinct characteristics. This article will go over some of the most common uPVC hinges and their benefits.
Egress/Easy Clean Hinge
These windows are an excellent choice for replacing or upgrading your fire escape safety window since they open up to a full 90-degree angle. They can also be lowered into an ‘easy clean’ position, allowing you to easily access the exterior of windows to clean them without climbing a ladder or lean over at angles that could be dangerous.
Yale is one of the most reputable and well-known brands in the world of home security. These hinges are suitable for any type of uPVC side-hung window. They can be moved to the easy-to-clean position by pressing a small button and then sliding the window sash to one side. After closing, the sash will be reset to its original operative position.
Both 13mm and 17mm are available. Use our Egress Selection Guide to help you select the best product for your window.
These hinges are designed to be used in conjunction with a standard side-hung frame which is made of aluminum or uPVC. They are equipped with a simple friction screw to alter the amount of resistance generated. This makes opening the window more simple and reduces the chance of closing the window hinge repair near me accidentally during high winds. They have been cycle tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
The Nico Egress Easy Clean friction hinge is simple to use and doesn’t have any buttons or catches. It provides a convenient and safe option for emergency exit and cleaning. Firstly, open the window to the egress (full opening) position, then press the hinge retaining clip that is located on the inner side of the bottom corner. This will release the bottom and top catches which will allow you to move the sash into the easy-clean position. Once it is in the easy-clean position close the window to reset the hinges to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges are often referred to as “Easy Clean” hinges are used to replace side opening windows to allow escape (fire safety) reasons. They allow for a larger opening in the event of fire. Building regulations require that this type of hinge must be installed in any room that has windows.
They feature an exclusive friction stay that opens the window to 90 degrees and allows the opening sash to slide across when it is open for easy cleaning of the outside of the glass, without having to use ladders. The hinges are easy to operate and do not have complicated buttons or catchers. They can be operated from the inside of the house with an easy, safe lever.
The hinges are made in the UK by Cotswold and come complete with a child safety limiter for day-to-day use that can be reverted with a hidden button giving you peace of thought that your children will not accidentally open the window too far. The stack heights are 13mm or 17mm.
To order these hinges simply measure the length of your current side-hung window hinge which attaches to the frame (see the guide on measuring your upvc window replacement hinges window hinges). Select the proper size hinge from the choices below.
Note that this measurement is taken from the part of the hinge that is attached to the frame and not the sash. The actual length of the hinge can be longer or shorter depending on how your old windows were manufactured. When choosing the width of the hinge the majority of frames made of upvc can accommodate with a height of 13mm, but if your old window frame measures 17mm, then select this option. Alternatively you can fit the 4mm packer to make up the difference. All the hinges are supplied in pairs (1 left and one right). The hinges do not come with screws. If required, these can be purchased separately. Our window repair screws made of upvc are highly recommended. These screws are designed to enhance your hinges’ performance and allow them work smoothly for longer. They have a lower friction design, and an improved weather seal that is fitted with a new nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open windows completely. The restricted child safety friction hinges help to overcome this problem and are a great solution when ventilation is needed but access for cleaning or escape in case of fire is not possible. They limit the number of times you can opening the sash, and allow overriding this limitation by pressing the button. They are available in 13mm and 17mm stack heights and can be used for both top and side hung windows.
The Nico Restricted Egress Friction Hinges combine the benefits of a standard restrictor, and a pivot for fire escape to provide a simple but effective way to comply with building regulations. It is available in 13mm or 17mm stack heights and can be used on both top and side opening uPVC window. It is available in a pair with one hinge being the restricted egress, and the other the unrestricted. This allows one to be placed at the bottom, while the other is set on top.
These uPVC restricting hinges have been tested to BS6375, part 2 and are designed for use on a window that cannot be opened fully such as a small children’s bedroom. The mechanism restricts how far the sash opens to a safe position of 100mm and then it re-engages after the window is closed.
These uPVC friction-style hinges can be used with all types of windows. They are especially useful for windows that are difficult to reach, like those in three-storey homes or those that require the use of a ladder. They can be complemented with our range of security enhancements such as hinge guard protection plates or dog bolts for PAS 24 performance.
When replacing a hinge on a window, it is crucial to determine the length of the current hinge so you can purchase replacements that are similar in size. The most efficient method to do this is by viewing the hinge in the image gallery and working out the location you would like it to be placed. The hinges that hang from the top can only be placed on one side, whereas the side hung ones can only be placed on one side.
Standard Hinge
A standard hinge uses metal-to-metal contact, and there are no additional parts to reduce friction. It is available in a variety of finishes and fire-rated. To determine the radius of your hinge lay it flat and align a dime and quarter in two corners. If the quarter is more snug then the corner should be rounded to 5/8 inches.
The right hinge can make or ruin the appearance of your patio door hinges. Matching the design and style of your hinges to your door will give it a cohesive and attractive look.