How to replace kia car key a Kia Sportage Replacement Key
For a variety of kia Dealer Replacement key models keys, there is an integrated keyless entry system. This key typically resembles an electronic remote and can be exchanged with a new one from a Kia dealer or a locksmith.
Key fobs may stop working due to a variety of reasons, such as batteries that are dead, worn-out buttons signals, signal interference or water damage. Here are some helpful tips to help you get your kia optima key fob programming key fob that is a replacement for the sportage again.
How do you replace a remote key or smartkey
It doesn’t matter if your Kia comes with an intelligent key, remote key, push to start key or a regular non-transponder metal key the battery in these keys will eventually need replacing. This is especially true if your car displays a message indicating that the remote or smart keys aren’t powered.
Fortunately, it’s quite simple to do. In order to replace the key fob battery take the mechanical key from the slit on the back of the key fob. Next, remove the cover. A small screw will be located inside the key fob to keep the battery in its place. With a small screwdriver, remove the screw and pull out the old battery. Then, you can insert the new battery and close the slit in the key fob.
Test the key fob by pressing the lock or unlock buttons. It’s good if the doors lock and unlock as expected. You can now make use of the hands-free lock/unlock feature on your kia replacement key when your fingers are cold or you need to run some errands in Brandon.
Note: Certain key fobs (transponder chip or smart keys) may need to have their programming completed. This requires a specific programming machine that only the dealer or automotive locksmith has access to. Other keys (non transponder metal keys) don’t require programming. If you need to reprogramme your key, you’ll need to note the key code’s number on the key code tag.
How do you replace a dead battery?
If your kia venga key key fob isn’t responding when you press the lock or unlock button on the fob, this is a clear indication that the battery needs to be replaced. A low battery can also cause other issues, such as the check engine light appearing or the engine not working correctly. It is fairly easy to replace the key fob batteries by using only two tools.
Before you begin the process, make sure that your vehicle is off and that all doors are closed. Find the small, metal or plastic piece at the bottom of the key fob. Jiggle it until the metal key falls out. You can then put the key into the driver’s door handle to open your car.
To replace the battery inside the key fob, remove the rear cover. Make use of a plastic pry tool to loosen the latch that holds the black negative cable. Remove the old battery and then orient the new one so that the “+” positive side faces you, while the “-” negative side is facing the fob’s electrical contacts made of metal. Avoid using excessive force when pushing the new CR2032 into place to avoid breaking or bending the steel contacts.
Once the new battery has been installed and the key fob is turned on, turn it off and on in the ignition several times until the door locks. You can then test your Kia’s keys fob again to make sure it’s working properly.
How do I replace a smart keys
Depending on the model of the Kia Sportage, you may have an ordinary key fob or a smart key. The difference between these is that the smart fob has tiny mechanical key blade in it, whereas the standard key fob does not. Both types of key fobs have a battery inside them that will eventually need to be replaced. This is an easy process that takes just two minutes.
Be sure to switch off your kia sportage spare key, and be on a level and well-lit surface prior to you begin. Also, remember that there are small parts inside the fob that can be snagged if not vigilant.
The first step is to locate the small release button on the lower backside of your fob. It could be a circular or rectangular slot. When you press it mechanical key blade, it will come out and you will be able to open the key fob.
Once the key fob is opened, remove the battery that was in it. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. After you’ve finished with the battery, you should be able to lock and unlock your vehicle with your key fob, even if your engine isn’t running!
How do you replace the mechanical key
The Kia key fob is an amazing convenience that lets us lock and unlock our car at the push of the button. Like any other device, it can have problems at times. Luckily, there are ways to fix these issues and ensure that our key fobs are in good condition for the long term.
One of the most frequently encountered issues is a low or dead battery. This can cause your fob to stop working or operate intermittently. If this is what you are experiencing, replace the battery with an entirely new battery.
If this doesn’t resolve the issue, try using a standard flathead screwdriver and wedge it into the casing of the fob’s plastic. Be careful not to scratch any internal components or scratch the plastic. When the battery is open, carefully take off the battery that was removed and replace it with a brand new one.
After the new battery has been put installed, close and unlock the doors with the mechanical key (every key fob in the kia has an emergency mechanical key that will fit into the slot). Test the key fob and make sure it is working correctly. If the fob still isn’t functioning, contact a dealer or locksmith to help resolve the problem. To avoid a lockout in the future ensure you purchase an emergency key that can work on all door and trunk cylinders.