How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. This requires a handheld computer, called Tech-2, to be used by the dealer. A new key and transponder need to be bought and then programmed to the car.
It is an excellent idea to rotate your keys so that one does not get worn out more quickly than the other. This will help keep your keys in top condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They are equipped with electronics that make them difficult to duplicate. This has made stealing cars a lot more difficult than it was just a few years ago. However, it has also made the replacement of lost keys a more expensive task.
Every owner of a Saab 9-3 should have at minimum two working keys. It is expensive to replace a lost key as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers usually charge between $100-$200 to complete this.
There are ways to cut down on these costly costs. Some parts dealers will use the code of an extra key to cut a brand new metal blade for less than that of a dealer. The key must be the exact identical to the original one for it to function in your vehicle.
You can also replace the case yourself by following these steps. You’ll need a flathead screwdriver and some patience. Using the screwdriver, slowly tear the plastic away and remove the emergency key from the case. Once the case is open, remove the electronics and put them back into your new case. Insert the correct key and badge into the case.
replacement saab 9-3 key Battery
The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This DIY video from YouTube Cyclone Cyd, a user on YouTube, explains how to Program saab 9-3 key fob to replace the battery of the remote key fob in only four steps. This tutorial is suitable for any modern-day saab replacement keys uk key fob although the process might differ slightly.
This button is usually located near the Saab logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to unlock the case of the fob so that you can replace the battery.
After you have installed the new battery CR1632, you are able to reassemble the remote key fob. Then, you can program it into your car. The entire process should take no more than a half hour at the most. It is a simple process that does not require any special equipment.
The process is a bit more complex if you lose your key, but it’s possible. The dealer has to first verify the VIN of the vehicle and order a replacement TWICE module and key blade that has the correct unique code. Then, they’ll have to cut the new key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it has an internal battery. The batteries have a lifespan that is a long time, and they eventually die. This is a problem that occurs in all vehicles. The good news is you can replace the battery in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronics in place. You can simply remove the case and replace the batteries. It’s important to note that you will need to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot that is located in the middle of the case. The case will split as you turn the screwdriver around it.
If you’re about to replace the keys ensure you have spare keys, as this can reduce the total cost by a substantial amount. If you have an additional key, you can request the dealer to cut it and program it for your car. This is much cheaper than purchasing a brand new key fob.
It is possible to add a second key to your car if you don’t already have one, but it will require a great deal of research and effort. A second key can cost about a few hundred dollars and it also requires programming of the car’s computer. Professionals can do this however it’s a costly option.
Replacement Ignition
Contrary to earlier Saab vehicles, the latest SAAB 9-3 models are equipped with an advanced alarm system that is dependent on a coded keys. This means that when you lose your sole functioning key, getting an additional one could be extremely expensive since the car has to have a computer module fitted and must also be specifically programmed to accept an extra key. Even a dealer can charge hundreds of dollars to program an entirely new key, even if they’re unable to do it.
If you’ve lost your only working key and a dealer is able to replace your car’s computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge a premium for it. We can reprogram the EEPROM in your car computer to be ready to accept an additional key. This will save you more than 50% on what you would have to pay the dealer.
If you’ve been a long time owner of a 03-11 saab replacement key 9-3, you probably have noticed that the ignition switch isn’t the most robust. If the ignition key you have isn’t working correctly, you should look into replacing it. They can become very sticky and the buttons have been known to fall off. The good news is that replacing the ignition key isn’t as complicated as it seems and can be done fairly quickly with the proper tools.