How to Change a Subaru Spare Key
Contact a locksmith if lose your Subaru key. Locksmiths can usually cut you a key for less than the dealer.
Subaru car keys are typically either smart “push-to-start” fob remote keys or basic metal keys. The Fob key will need to have its chip reprogrammed.
Keyless Entry System
A key fob can be used to lock or unlock your Subaru from a distance. You could even open the trunk or lift gate of your vehicle. The remotes use a keypad inside your car to connect with your vehicle’s computer system.
Certain models of Subaru offer a less-known feature called PIN Code Access. You can make a custom number sequence to open and start your car. If you have a newer subaru outback key replacement Forester, Outback, Crosstrek, WRX, WRX STI or Impreza that has this feature, make sure you check the owner’s manual to learn how to make use of it.
If your keys stop functioning, there’s a good possibility that the battery in the key fob is dying. You can check the battery life of your key fob by using an instrument that is portable or a multimeter in your garage.
Next, you’ll want to remove the key fob from its case and examine the circuit board that controls the transmitter. This board will have one or two sets of 8-digit numbers, so jot down the first set so you are able to recall it later. Once you’ve completed this, you can start programming the key fob at home. The procedure for doing this differs based on the make and year of your vehicle but it’s usually easy enough to complete yourself.
Key Fobs
subaru transponder key‘s latest models have key fobs that not only unlock doors, but also turn on lights, lock the gas cap and even start the car. This last feature is particularly useful if you’ve ever parked at the pump only to find that your car won’t start because the battery for the key fob has died.
If your Subaru is new or old you can be sure that the key fob can be replaced with little difficulty. Be aware that some more modern models, which have their high level technology, may require a visit to the dealer. With some effort and time, you can build your own replacement key fob.
Start by examining the circuit board that controls the transmitter on your key fob (instructions for opening the case must be included in the owner’s manual). There should be two or more serial numbers with 8 digits each. Note down the first number in the series and keep it in a safe place to refer to in the future.
After that, get in the driver’s seat, and close all doors. Turn the key 10 times to start your car, then switch off. Press the lock button on your key fob, then open the door. This will verify that your doors are working properly. After that close the door and take the key out of the ignition. The chime should be heard from your vehicle once more, signaling that the key fob has been programmed.
Ignition System
The key battery may be dead if your Subaru keys don’t work as they should. If you are aware of the issue, you can replace the battery in your key fob yourself. The replacement battery isn’t expensive and relatively easy to locate. If the key fob isn’t responding to your commands there could be a different issue. To get a spare key, it’s advisable to go to a dealer. They’ll guarantee that the key is genuine subaru key fob programming key that’s in warranty and it’ll be programmed to your vehicle. This is safer and more convenient than purchasing an aftermarket key from an organization via the internet.
You can also have the dealer cut a new key if they are provided with your VIN and evidence of ownership. They’ll use this information to create a code for the new key so that it can be recognized by your immobilizer. This is a more complicated procedure than cutting a single key, and the dealer will charge more for it.
Once the new key is programmed, you’ll be able to swap it out with your current key. You’ll only have five seconds to insert the second key, so it’s crucial to keep an operational key in your pocket. When the security light ceases to flash then you can take out the new key and test it to confirm it’s working properly.
Battery Replacement
subaru impreza key replacement cost (www.Cheaperseeker.com) fobs are extremely useful since they can turn on the sunroof and power windows in your vehicle with just one button press. But, the battery in the Subaru key fob is not designed to last forever and will eventually need to be replaced. Fortunately, changing the battery is a simple process that you can do yourself with the assistance of this brief guide from Capitol Subaru.
To begin, you’ll need to locate the small crevice in the seam that separates the front and back of your key fob. With a small flathead screwdriver you can pop this seam wide to reveal a small compartment inside that houses the battery. Insert the new battery and make sure it is facing up correctly. Remove the old one. After everything is in place then you can use the new key fob to lock, unlock, and start your vehicle without difficulty!
You should always have a spare set keys, particularly if yours is broken or has been lost subaru car keys. A new key can be found at your local dealership for cars or you can get one cut from locksmiths. Either way, it’s important to get your key fob functioning properly as soon as possible so that you can drive in a safe manner!