How to Replace a UPVC Window Handle
If your upvc window handle is damaged, don’t be concerned. Replacing the upvc handle on windows is a straightforward job that can be completed in just a few simple steps.
No matter if it’s an in-line or a crank espagnolette window handle each one has an oval spindle protruding from the back plate. This spindle is then placed into the locking device.
Identify the type of lock and handle
Over time window handles or locks can be damaged and lose their functionality. The good thing is that this can often be fixed without having to replace the entire uPVC window unit. One of the first things you need to do is to determine the kind of lock and handle you have because this will help determine the parts will be required for replacement.
You can determine the type of handle by looking at its base. There is an anchoring screw or pin that holds the handle to its base. If the screw is gone, it could be an indication that the handle has split from the base section. If the handle has been split in the middle and is no longer gripping the spindle, this could also mean that it needs replacing.
There are many different kinds of uPVC window handles, but the most common is the Espag handle. They are usually secured with two bolts and have a spindle that engages the lock mechanism within the frame of the window. These handles are usually used on tilt and turn uPVC windows.
Cockspur handles are another kind of uPVC handle. These are similar to the Espag handle, however they have a low projection from the frame. These handles are generally used on older uPVC windows replacement near me.
Finally, there are also Venetian window handles, which are similar to the Espag handle, but they have a flat base that allows them to be placed in a flush position with the frame. They are an excellent choice for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. The handles are available in a variety of colours that can match any design.
Take a measurement of the spindle
It is important to be aware of how the handle fixed in place before ordering a replacement. This will determine whether it’s too tight or too loose and also if it can fit into the window frame. You can do this by identifying the type of handle you have and measuring the length of the spindle. The spindle is a metal shaft that connects the handle to the lock within the window frame. It’s available in different sizes with the current industry standard being 8mm. Older handles may have a 9mm cross-section, therefore it’s important to determine the cross-section of the old one to make sure you get the proper size replacement.
There are a variety of window handles. However, the most popular are inline Espagnolette and cockspur handles. These handles are used to operate a locking system inside the window. They employ shootbolt rods to secure the window when it is closed. They are secured by pins or screws depending on the kind of handle you have.
You can buy replacement upvc handles online or in most DIY stores. They come in a range of finishes and are suitable for both new or replacement windows. For extra security they can be key-locking or non-locking in fire-escape.
To take off the handle, simply open the window towards the door and then remove all screws that hold it in place. Place the screws in a container to prevent damage. After the screws have been removed, carefully remove the handle and take a measurement from the base to the tip of the spindle. This will give you the information needed to buy the correct replacement. The spindle of the handle is the metal shaft that connects it to the lock gearbox in the window frame.
Remove the old handle
Switching a uPVC handle is a simple job that takes less than five minutes if you have the proper tools. The first thing you need to do is determine the type and size of the lock or handle. This will allow you to determine the best replacement. After that, weighing the spindle will help ensure that the new handle is a suitable to the existing one. The handle that was used previously needs to be removed and replaced with the new one.
The majority of uPVC handles come with inline Espagnolette handles. They have central spindles that slot into the locking mechanism on the window. They are generally easily removed, but might require force if get stuck. There are typically two screws that keep the handle in place which can be removed using a screwdriver or pliers. It is also possible to remove pins, based on the type of handle.
After removing the screws, you can then remove the handle that was previously attached. The top of the base plate should be visible when the handle is in an open position, revealing two screws you can remove. There’s also small silver or another color sticker that must be removed if in place.
It is now possible to screw into the new handle using the screws from the previous handle. Make sure that the screw holes are aligned on the window to the holes in the handle. After you have done this then replace the screw caps. Test the new handle. It’s simple to swap the uPVC, however you need to do it correctly.
Fit the new handle
It’s time to install your new handle if you’ve successfully removed the old one from the frame. Begin by locating the screw covers and levering them out using your screwdriver. Once the screw covers are removed, put them in a safe place before moving on to the next step.
Then screw the spindle into by aligning it with the existing hole. The holes on the handle to the ones in the window frame. Use a screw of the same size as the previous one.
uPVC Espag handles are fitted with a 7mm square spindle that rotates the lock mechanism fitted to the window. This type of handle is utilized in the majority of modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles have a long, curved nose that locks onto the outer frame or cross member of the transom bar. They are often found on older uPVC windows.
Once the new handle has been put installed, it is important to ensure that it operates properly by locking and unlocking the window a few times. If everything goes to plan the new uPVC window handle should now be secure and functioning smoothly. If not, the steps listed above will allow you to identify any issues and fix it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or any other home improvement that is double glazed replacement windows. Our glaziers have been trained to repair or replace a variety of window handles and frames which makes us a great choice for your double glazed windows replacement glazing requirements.
Test the new handle
Over time, uPVC handles can become damaged and worn out. This can make them less secure and effective which is why it’s important to replace them right away. It’s also an ideal idea to do this when you upgrade your windows, since changing the handle and lock will ensure the security of the windows you have just bought.
There are a variety of uPVC window handles. Some are secured with pins or screws, whereas others feature blades that fit into the lock mechanism. Each type has a different way to replace it, so you have to know what type you own.
Espag window handles are the most common kind, and are typically found on newer uPVC windows glass replacement near Me. These handles come with spindles that extend from the handle and goes into the gearbox of the lock and when you open the window, it activates the locking mechanism. They are also easy to take off, but you should be careful not to harm the mechanism or the handle while taking them off.
Cockspur window handles are a popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the wedge-shaped striker plates on the frame. This type of handle is more difficult to fix than other kinds, but it’s still an excellent choice for the majority of homes.
Venetian handles are attached by two bolts, and they have a low projection on the frame. This is different from the Espag handle. They are ideal if you need a flush handle that blends with your uPVC windows. They’re a great choice for commercial and residential properties.