Choosing uPVC Replacement Window Handles
Almost all customers agree that the upvc replacement window handles are simple to install and feel as good quality. However, it is important to realize that the type of handle you pick should be appropriate for your window.
The height of the step is the most crucial factor. It is the distance between the handle and the base or frame. Other factors to consider are lockable mechanisms and styles.
replacement window glass parts
There is a broad selection of replacement window handles made of upvc available for purchase. There are a variety of styles and colours to choose from, so you’re sure to find one that will match your windows. It’s easy to impulse buy especially if the handle is damaged, so it’s a good idea to take your time and check certain things prior to committing to buying a new one. First, you must know what type of upvc handles you own and what the differences between them. The table below lists the most commonly used handles to help you choose the one that will fit your upvc window.
The majority of double-glazed windows today have epag handles. They are typically attached to the frame using two screws that screw into the frame from both sides.
The spindle bar on the back could be of different in size, and will determine if they are left-handed or right-handed. This is why it’s important to measure the current handle in order to make sure you’re getting the right replacement.
Usually fixed with two bolts much like the Espag handle, but they have a low projection from the frame which means that the arm won’t poke through your blinds. This is a great option if you want the handle to blend with your blinds, and you have upvc windows.
Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This type of handle is typically used on older Upvc windows as well as some wooden windows.
On casement windows tilt and turn handles can be operated by either turning the handle or pressing on the top of window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. They’re also an excellent option for those who have limited mobility and enhance security and access to the home.
Tips and tricks
Many people will have to replace their uPVC window handles at some time. When this occurs it’s best to be aware of a few tricks and tricks that will assist in making the task go as smoothly as possible.
Check what type of handle is at your home. Depending on the kind of handle and the locking mechanism, it could be necessary to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing the handle, you’ll need to change them, as well as the handle itself.
Fortunately, the majority of uPVC handles are similar and follow industry standard sizing, which makes replacing them a simple process. The first step is to remove the screws from the handles, which are typically the pozi-drive screws. Once these are removed, you can then remove the handle.
It’s a great idea to keep track of how much the spindle extends from the base of your handle when you separate it. This will help you determine the length of the spindle to determine the replacement handle. Simply measure the amount that the square peg extends from the bottom of the handle.
This is especially important for inline uPVC window handles as they will always be straight and will only open from left or right, and they won’t operate in the middle. If you’re not sure what kind of handle you have at home, it could be beneficial to get an existing handle from your neighbour’s house and see how it functions to get an idea.
Another excellent method to figure out what the handed of the uPVC window handle is is to look at the way the handle rotates when operating. Handles can be rotated clockwise or counter-clockwise. If you aren’t sure you are, ask someone else to open the window using the handle and observe what happens.
Take a measurement of the spindle
It can be difficult to pick the correct replacement handle for your window since there aren’t all handles that have the same dimensions. It is crucial to measure the spindle accurately when installing a new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles that operate in different ways therefore it is crucial that you know which kind of handle you have as well as the type of locking system you have.
Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox inside the window frame. When you turn the handle, this turns the lock within the gearbox and opens the window. They are installed on uPVC windows with casement. They can be locked using keys for extra security.
Cockspur handles are usually found in older double-glazed uPVC window frames. They have an “nose”, which closes over a wedge shaped striker block. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles because they aren’t as common as the handles with espagnolette.
If you have a tilt and turn uPVC window, then you’ll require a specific kind of uPVC replacement handle that comes with an entirely different locking mechanism. The handle will tilt the window and also allow it to rotate back and forth to fully open it. You should select an opening handle that has a spindle of at least 55mm to be able to reach the window frame.
You can use the same method to remove and replace this kind of uPVC handle, however you’ll need to be careful when unscrewing the old one. It is possible to open the window a little larger than normal to ensure you get to both screws fixing it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the correct position then tighten the screws and then test the lock to ensure it is working correctly.
Replace the handle with the new one.
Once you have the right replacement glass for windows near me handle, it should simply screw into place. This will require a screwdriver, but could be simpler with an electric one. It is important to not overtighten the screws before screwing them in. This can cause the knob or handle to swell.
Inserting the spindle is the next important step to attach the new handle. The spindle is a part that runs through the handle to operate the locking mechanism inside the window. It is important that the part fits correctly because this will permit the window to be opened and shut securely.
There are several different types of uPVC window handles. There are a variety of window handles made of uPVC.
Espagnolette Handles – These are handles that are inline and can be used to tilt and turn windows to open the window.
Cranked Espagnolette Handles: These are similar to inline handles, but have a curvaceous shape that can be useful for hard-to-reach windows.
Tilt and Turn Handles They are used on tilt and turn windows to operate the opening and closing mechanisms.
They are the most popular and the majority of uPVC windows have them in their place. In the UK, they are commonly known as “Bay Windows”.
If your uPVC window glass replacement handle is damaged, it can be very frustrating. There is no need to replace the entire uPVC windows because of a damaged window handle. There are a few basic steps you can follow to fix or replace a broken uPVC handle.
You can repair your broken window handle fast by identifying the model and measuring the spindle. It is essential to take your time and prioritise safety when working with windows and tools however, this is a straightforward task. It could mean the difference between having a safe and secure home or a window that can be easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, call Bridgewater Glass. We have a team that is skilled and knowledgeable to assist you with any problem.