If your 500 keyfob ceases working, try a different one to see if it can be detected by the car. If it does, then the issue is likely with the original fob’s battery or water damage.
Replace the battery first. Make sure the new CR2032 coin battery is properly inserted, with the “+” side facing downwards in the fob.
Dead Battery
Most of the time when a fob isn’t working it’s because the battery is dying. It’s simple to fix it Most fobs provide a warning signal if the battery is in low. There are instructions for most car fobs YouTube or in your owner’s guide. You can also bring it to a local locksmith or the dealer who provided it to you to replace it.
Sometimes, a fob won’t working due where to get a fiat key cut a glitch with the internal circuit board. This is a bit rare but it can occur. The internal chip may be damaged in the event you drop the fob onto something that is hard. It can also happen if you use an aftermarket key and the fob doesn’t work. In this instance, you will need to go to a dealer or a locksmith and have it reprogRammed to work with your 500.
One 2012 FIAT FIAT 500 flip key remote that resembles Ilco with locks, unlocks, and trunk buttons – new keyless entry replacement (will require cutting and program by locksmith).
Damaged Chip
A key fob with the fiat punto car key 500 number is an electronic device that transmits the signal to the car to start when you push the button. It has a microchip which contains the code that is needed to communicate with the car. If the chip is damaged, it won’t transmit the correct code and the car won’t start. A locksmith can fix this kind of damage. United Locksmith is capable of offering this service to classic models as well as the latest ones, so don’t feel afraid to call them.
A locksmith can program an entirely new key fob. This is a lot less expensive than going to a dealer and will function exactly the same way. A locksmith will need some specific details from you, such as the year in which your vehicle was built and the name of its model.
Rub the chip with an old dollar bill if you’re not sure what to do. The copper on the bill is abrasive enough get rid of dirt and oxidation but it will not cause any damage to the microchip. The chip might not be repairable in the event that it has been physically damaged. This could happen if you drop it or run it over by your vehicle.
Water Damage
Whether you accidentally dropped your keys in the water, put them in your pocket while you were swimming at the beach or splashed them with water during a rainy day, it’s likely that your fob will have some water damage. Even if you only have an ounce of water on the key, it could cause serious problems with its electronics.
It is possible to solve this issue yourself by taking the fob out and cleaning it with a towel. After the fob is dry, you can replace its battery. It will then begin working again.
You can also take it to an auto shop or locksmith to get it professionally programmed and cleaned. These professionals will use special equipment to make sure that the key fob functions with the car’s computers.
When the key fob on your fiat punto car key 500 stops working, you may feel irritated and anxious. You may be tempted to visit a dealer to get your key fob replaced, but this can be expensive and unaffordable. A locksmith can replace your key fob without having to visit the dealership. For this reason, they are a superior choice than an auto dealer.
Pairing Issues
If you lose your key fob, or it stops working but there’s nothing problem there could be a chip that has gone off the rails. This could be due water damage or the battery is dead.
It is usually done by following the directions in your owner’s manual. However it’s recommended to have an automotive locksmith take care of this if you’re having trouble or the instructions in your manual aren’t working for you. This ensures the chip isn’t damaged and is the most affordable solution.
A number of owners have reported that their key fobs won’t lock their cars. This can be a problem if you need to refill at an gas station. Some owners have complained that their 500’s locking system has malfunctioned and they’ve needed to replace the entire intermediate steering shaft. This issue has been reported in a technical service bulletin (TSB) issued by Fiat.
If you’re having trouble with your Fiat, a reputable locksmith can help. They’re able to duplicate your key or design an entirely new key for fiat 500 one that can lock and start the car. They can do this without seeing your old key, and it’s typically cheaper than buying a new one from the dealer.