UPVC Replacement Door Handles
As time passes, the handles on your doors will get worn out and need to be changed. It is crucial to be able to match the dimensions of the old handles when replacing them.
The top screw’s position, the lever and the keyhole sizes are the three measurements you need to check. Refer to the size guide for assistance in this.
Inline Lever/Lever
A lever door handle is a contemporary handle that can be put in on replacement or new doors. This style of door handle is available in a variety of styles and finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever patio door handle Handle
The uPVC/composite door handles (https://marvelvsdc.faith/wiki/a_brief_history_of_the_evolution_of_upvc_door_Handles) are made of sturdy materials and are ideal for multi-point lock doors that require a strong design. The handles are inline and operate off the same spindle and screw fixings so they are easily installed on new or existing uPVC/Composite doors.
The design of the sprung lever allows the handle to be positioned and angled for comfortable operation and is suitable for all users. The handle has been endurance-tested to 200,000 cycles. This helps to ensure that the quality of finish and performance over time. The sprung lever can be cut to fit the widest range of locks. This is particularly useful in doors that are narrower, where the cylinder is situated further back in the door. A lever that is shorter is an excellent option for doors where the latch could be operated by a thumb turn inside.
Lever Pad
The lever pad upvc handle is different from the lever handles commonly found on doors. The handle can work off one single spindle (inline) or independently from each side using two offset spindles or inline (pad). They are usually used on upvc windows handles double-glazed doors and come in a variety of styles and finishes.
The handles are available in a variety of finishes, including White, Chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This provides the handle with an outstanding performance and durability to serve its intended use.
All of the UPVC lever pad designs come with a spindle and screws, allowing them to be installed on a new or existing uPVC victorian door handle. The backplate fixation centers of 211mm allow for a wider handle, which is often an advantage when replacing an old or damaged multi-point door lock mechanism. These levers for handles are also sprung, solving the problem of handles hanging out of the horizontal position when not in use.
When choosing a replacement UPVC handle and spindle it is important to match the dimensions of the PZ of the multipoint lock as well as the uPVC door. This measurement can also be referred to as ‘handle centres’ or cylinder centres’. It is important to match the right handles.
Once you have decided on the correct PZ size it is important to ensure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. These are typically round or square, with an internal lever, and an external push pad.
The majority of UPVC Lever Pads that we offer are sprung. This means they return to a horizontal position after they are not in use, rather than hanging and possibly being stuck in the frame. This prevents drafts and cold air from entering a property. You will also find that the majority of UPVC lever pad handles are swivel, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks are found on uPVC and other kinds of doors. They operate with a key to unlock a cylinder that will reveal pins that can be aligned with those inside the lock body, permitting them to turn an revolving cam, opening the door. Euro cylinders can be fitted with up to six pins. Internal and external doors require different levels of security.
Selecting the right cylinder for your needs is vitally important; this depends on the way your doors and handle are used. For example, external doors require an extra secure cylinder, while internal doors can be secured using the standard cylinder. In addition, some cylinders are available with extra features that increase security even more, like anti-drill and anti-bump characteristics.
To make sure that the euro cylinder is the right size for your door, it should be measured accurately. The cylinder needs to be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, if there is one. It is best to do this with the lock in place however, if this is not possible, you may remove it to measure. It is important to not have a cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.
The majority of modern cylinders have been designed with bump and anti-drill features included in their design. These are designed to reduce attacks by forcing cylinders to rotate in a different direction. This can help to deflect attacks and keep your door safe.
Some cylinders are designed to withstand snapping. This is an increasingly common type of attack on cylinders, where the break line inside the lock is targeted using a special tool to snap off the front of the cylinder to allow the door to be opened. This is a much faster and simpler method to gain access than the use of a multipoint locking system. It also leaves no evidence of the break-in which could hinder insurance claims.
Spring Cassette
The spring cassette is located within the base of your door handle backplate providing a sprung solution that returns your multipoint lock handles to their rest position after using. In the past, a lot of these types of handle did not have a spring built into them, and as a result, they tend to droop or drop once the locking mechanism is removed. This simple feature is one of the most effective ways to fix this issue and is an excellent way to stop your doors made of upvc from becoming stuck in the open or closed position, since they aren’t always simple to manually close by hand.
These spring cassettes are specifically designed to be used with multipoint locks that are sprung They will not work with unsprung multipoint handles tilt and turn window handles you will need to have a custom hole cut into the backplate to allow them to fit (please see image for technical diagram). They are a replacement for existing broken or missing cassettes within the door handle backplate of numerous kinds of uPVC doors. They feature a square cut-out that allows for an 8mm spindle to be used and are sold as a set.
These spring cassettes are a great value solution to the issue of door window handles for upvc that are sagging. They are simple to install and will extend the lifespan of your uPVC doors. Contact us for more information about our wide range of uPVC accessories and spares. We are here to help and happy to offer professional advice.