Subaru Impreza Key Problems
Subaru Impreza keys allow owners to lock and unlock their vehicles by simply pressing one button. A dead battery in the key fob is the most common reason for the key fob to not function.
It is simple to change the battery. First find the small device that houses the flat round battery inside the key enclosure. Then, open it and replace the battery, ensuring that the correct side is facing up.
Keys stolen or lost
We’ve been there before where you reach into your pocket to retrieve your keys but they’re not to be found. It’s not difficult to find your Subaru keys, and there are a few methods to replace them quickly and cheaply.
If you have a regular metal key you can bring it to a local hardware store or locksmith that sells Subaru blanks (these are usually marked with “Subaru”) and have them duplicated. If they need to replace the battery on the key fob, they can buy a CR-2032 at all hardware stores and online retailers like Amazon.
You’ll need to visit a subaru lost keys dealer or an automotive locksmith to program new keys. The cost will range from $50-$250, based on if your Subaru features a transponder chip or smart key feature.
To have a new key programmed, you’ll have to give the locksmith or dealership your vehicle identification number (VIN), which is located on the dashboard near the windshield. This number is required to confirm the status of your vehicle’s warranty and that the key is programmed correctly for your Subaru model and year. The VIN also contains information about the maker and where the car was manufactured, and whether it comes with any particular features, like an immobilizer to prevent the engine from starting if a incorrect key is used.
Faulty Key Fob
A key fob that doesn’t work properly can be caused by a number of reasons. It could be as simple as a problem with the battery or a more intricate repair. A dead battery, programming problems with the car, or other electrical issues with the vehicle are some of the most frequent issues with a Subaru keyfob.
The battery in the key fob is able to be replaced quickly. These are available at hardware stores as well as big box retailers. These cost around $10 each and can be changed in a matter of minutes. How to do this should be in the owner’s handbook. There are numerous YouTube videos that can walk you through the procedure.
Another possible cause is water damage to the key fob. When you take it out of the pocket and putting it in the water could cause damage to the clips made of metal that hold the battery in place. If the key fob still having problems after replacing the battery, the problem could be due to the circuit board of the transmitter or other components of the vehicle. A technician skilled in troubleshooting the vehicle will determine the cause and pinpoint the problem. They can reprogramme your key fob to make sure it is compatible with your vehicle. They can also determine if there are any antenna or wiring issues that stop the key fob from sending signals properly.
Locking issues or unlocked locks
There are a few possible causes for your Subaru Impreza’s key fob having trouble locking or unlocking the doors. This issue can be caused by a dead coin battery, a malfunctioning module and signal interference or water damage. You can have the key fob programmed by a dealer or locksmith.
If you cannot open the trunk, it’s possible that the lock setting on the key fob has been set to “on”. This is a security measure which prevents thieves from taking the vehicle. Contact your SUBARU dealer to alter the settings for the trunk lock and unlock.
A locked steering wheel could also occur when the car locks itself automatically after a sharp turn. This happens when the vehicle detects the suddenness of a turn. It could affect the transmission system and engine. To avoid this, it’s a good idea slow down while turning.
Make sure that the dealer or locksmith has programmed and cut the spare keys or replacement Subaru Key cost keys you have. Also, make sure the emergency key is working on each of the trunks and doors, as these are the only ways to get into the vehicle if locked out. Also, check that the new key or spare doesn’t have any marks or signs of manipulation on it.
Keyless Entry
Many Subaru models come equipped with keyless entry. This allows you to lock and unlock trunk and doors at the press of a button on your remote. The system is based on a short radio signal that communicates with the vehicle whenever you’re within range of it. There are a variety of systems that provide this feature. They range from simple kits that only unlock the door for the driver to more sophisticated ones that permit remote starting and connectivity to smartphones.
Having keyless entry on your subaru car key is convenient and secure but it’s vital to know what to do if the buttons don’t function properly. Try troubleshooting yourself, but it could be essential to get your subaru outback key replacement diagnosed by an expert. In the meantime, you can follow these suggestions to keep your car’s remote working as it should.
If your Subaru’s key subaru fob becomes wet, it’s a great idea to clean the electronic chip of it using isopropyl alcohol. Let it dry completely before putting the battery back into. This will prevent moisture from damaging your fob and causing problems down the road.
If your key fob has stopped responding, switch off the engine and then open the door to the driver. Press the door button once to unlock it and after that, press it again to close. You will need to press the button a couple of times typically one for each digit, until you hear the chime. Repeat the process with each door until get a response from all of them.