double glaze repair near me Glazing Door Lock Repairs
Are your uPVC window or door mechanism broken? Perhaps the door or window handles aren’t able to connect correctly or are difficult to use.
It’s important that the double glazed repair glazed doors operate smoothly, otherwise you will lose energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock for reasonable costs.
Snapped Key
It can be frustrating when a key snaps into a lock. It can also be a security issue, as it may make you vulnerable to a burglar if the door is not locked. Fortunately, there are some quick fixes you can try to resolve the issue and get your door working properly once more.
Be calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the broken piece of the key further into the lock, thereby making the situation even more difficult.
Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also use the screwdriver to break up any pieces stuck. If you happen to have a bit of the key left sticking out and you want to remove it, use a paperclip or some other metal object that is thin to grab it and remove it. Both methods work, but be very careful not to push the damaged piece of the key further into the keyway.
Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don’t have any of these items then you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grip and pull out the last part of the broken key.
If you can’t get the broken piece of the key out, try using a lock de-icer. It’s available at most hardware stores and is used to freeze any moisture that may be present in the lock.
If none of these solutions seem to work, it might be time to call a locksmith. Fitlocks experts can quickly fix problems such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure double glazing windows repair glazing door mechanisms to ensure that they are simpler to use. Book a repairing double glazing windows glazing repair (see this website) with us online, or give us a call to discuss your needs.
Broken Cylinder
A damaged cylinder poses an extremely risky security issue. A professional locksmith is able to fix the cylinder. A locksmith must tap the cylinder to fix it. This can be accomplished with the hammer or other tool. However, the most effective method is to use a wire or a long match. Position the match or the wire’s end close to the keyway. After this, the locksmith will strike the lock and break it open. This is far better than using a heavy hammer that can damage the lock.
Overheating is the primary reason behind cylinder heads cracking. This can occur when the cylinder block and cylinder head are made from different metals, including cast iron and aluminium. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand faster than the rest.
Another reason that could cause cracks in the cylinder is corrosion. When the cylinder head and cylinder block are not properly maintained, this can cause corrosion or rust, which may cause them to expand at greater rates than they should. This can cause cracks over time.
If your uPVC window or door lock is stiff and requires a lot of pressure to turn, it could be due to a variety of reasons. This issue could be caused by a malfunctioning locking mechanism, or misalignment as well as a worn-out handle.
Fortunately, this is an easy and inexpensive fix for most homeowners with double glazing window repair glazing. A professional locksmith should be able solve the issue within an hour of arriving at your property. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, and also change the gearboxes. A skilled locksmith will always be able to inform you of the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which offer an additional layer of protection against burglars. It’s a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks are complex mechanisms that deteriorate with time and use, so it’s no surprise they occasionally break. If yours fails it’s difficult to identify the cause of the issue. Make sure that you repair it correctly.
Fixing your broken handle, whether it’s an internal latch or locking mechanism can increase the security of your uPVC door and prevent draughts. It is costly to repair or replace your handle if it is not done correctly and can also damage the frame and the lock of your door.
Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the back plate, which is usually concealed by an aesthetically pleasing cover for the screw reasons. You should not be able to replace any internal parts of the handle like the plates and levers on either side. Ideally, keep these in the same place so you can replace them when needed.
Then, using an additional screwdriver loosen the screw that connects the handle with the spindle at the back. Once the screw is loose, you can pull the handle out and take out the broken spindle. Replace it with a new one, making sure that it’s the same length as the old one (you will typically find them online or in hardware stores) and then securely screw it in the right place. Be careful not to tighten too much because this could cause damage to the handle or the window frame.
Close the handle and try it. It is likely that it will operate smoothly and you’ll be able to open your window once more.
While you’re working on the handle, be sure to check your uPVC windows are shut correctly. If they’re not closing correctly, you could encounter damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges of your window frames to ensure that they close correctly.
Broken Spindle
It is more typical for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is attached to a central rod that activates a series of locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism does not open after the handle is turned, it is most likely the spindle is broken. This can be a problem that is frustrating.
There are solutions to this issue. A good locksmith can quickly and efficiently fix this problem. A good locksmith can disassemble the window’s handle using a tool to take out the wheel from the area in which the spindle is. This can be done with no damage to the handle or window frame.
After removing the wheel, the technician will inspect the spindle and identify the cause of the break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as well as any specific areas of wear or damage. This procedure is typically carried out by technicians working in a clean environment.
The next step is to clean the damaged spindle, this helps eliminate any dirt or debris that might be obstructing its normal operation. After this, the spindle can be repaired or replaced. If it’s being replaced, the technician could use the dowel that is similar in size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has precisely matched to the handle.
If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centres sell generic replacements but if the design of your window is unusual then you will need to contact a wood worker or cabinet maker who can replicate the exact part for you. Once the new spindle is in place it can be positioned to the handle by lining up the screw holes in the handle and the frame existing screws. Once the new handle is in place, you’ll be able to operate your uPVC window.