Add Warmth to Your Home With a Fireplace Wall Mount
Create ambiance and warmth in your office, home or commercial space by installing a fireplace wall mount. They are usually simple to install and include mounting brackets for either hanging or recessing into walls.
Follow the instructions on the manufacturer’s site for a quick and easy installation. Make sure that the bottom of the fireplace and the wall-mounting bracket are compatible. Then, you can secure the fireplace to the wall.
Size
A wall mounted electric fireplace can be a focal point within a room that creates warmth and ambiance. These fireplaces are available in various sizes that can be adapted to suit any space. A smaller unit would be perfect for a bedroom while a larger model could be used in a living or family room. Certain models come with recessed options for flush installation against the wall to create an elegant look.
The height of the fireplace wall mount can also affect how it looks within a room. A lot of people put them higher on the wall to create a dramatic impact. They are usually six to 12 inches above the floor. Some people prefer to put the TVs at a standard height of 4.5-5 feet. This lets them be seen by most people sitting in the room.
Regardless of the size you choose regardless of the size you choose, there are a few important aspects to take into consideration to ensure that your fireplace is safe and effective. It is recommended to keep all combustibles at least three feet from the fireplace including furniture, drapes, and other things. If possible, you should also secure the mounting brackets to studs. If you are unable to locate studs, you can use plastic anchors. This will ensure that the fireplace won’t be pulled away.
Another important aspect to take into account when selecting a fireplace wall mount is the amount of heat it produces. A good rule of thumb is to select a model that produces about the same amount of heat as your typical electric heater for your home. This guideline will ensure that your fireplace will provide enough heat to the entire room.
Some fireplaces have distinctive features that set them apart from the competition. Some fireplaces come with remote control with adjustable settings for brightness, as well as no-heat mode. They also come with cool-to-touch glass and realistic-looking LED flames. Other notable features include a built-in shelf to hold electronic devices as well as an easy, no-professional-help installation procedure.
Installation
A fireplace wall mount, unlike a built-in electrical fire that must be hard-wired into the electrical system in your home, is semi-permanent. It can be installed straight onto a wall or put into an adjustable bracket that is fixed to the wall. It is important to select the location that is close to an outlet to permit the power cord to reach it, while still providing enough clearance from other objects. This is in line with the manufacturer’s recommendations in your owner manual.
Before you begin the installation process, be sure that your freestanding fireplace is in good condition by plugging it into and playing around with its LED lights and the heat settings. This will tell you if the fireplace suite is ready for installation or if additional testing is needed.
Prepare the area where you plan to install your fireplace mount. Based on the model you purchase, this may involve mounting a bump out onto the wall or covering the existing wall with drywall. In the latter scenario, use proper drywall methods such as tapeing and mudding. Let it completely dry before you can continue.
After the walls have been made then attach the brackets to the wall with screws. It is recommended that they be fixed into the studs behind the drywall. This will prevent the fireplace from coming loose from the wall in the future.
After the bracket has been secured, it’s now time to install the fireplace. The design of the fireplace can differ however, there will always be a ledge on which the fireplace is placed and a spot to attach it to brackets that are on top. It is then possible to put any additional media like stones, embers, or logs within the fireplace.
Additionally, some models permit you to fit the firebox and screen as a unit to the wall bracket. This can make installation much easier however, you must ensure that everything is secure and fits properly prior to finishing.
After the fireplace is installed, you can finish the look by either screwing the bracket on the wall and trimming the excess wires. You could also think about using paintable wire covers to hide the power cord if you wish.
Safety
A fireplace wall mount allows you to heat your home while preserving valuable floor space. However, it is essential to take safety precautions when using this type of fireplace. The first step is to ensure that the unit is grounded to avoid electric shock. You should also be sure to follow the instructions of the manufacturer for proper use.
While it is possible to find wall-mounted electric fires (solo-shoes.ru) that don’t generate any heat, most will feature a form of heater to enhance the realism and ambiance of the flame effects. It’s typically an element of heating powered by a fan that blows air over the heating element. Some models also include an infrared heating source.
Once the fireplace is mounted, you should be careful not to touch the hot surface since this could cause burns and damage the appliance. Additionally, it is recommended to keep flammable materials at least three feet away from the fireplace to reduce fire risks. Be careful not to block vents at the back of the fireplace.
There are other safety features to be a lookout for when selecting the wall mount for your electric fireplace. For instance, you should be sure that the device comes with an emergency shut-off feature to prevent overheating and fires. It is also recommended to purchase one with a lower temperature output, since this will save energy.
The material used to surround is also crucial. You should select an option that is safe for children as well as pets like glass, steel or wood veneers. Additionally, you should pick a model with an LCD display or remote control to allow you to operate it effortlessly.
There are a variety of wall-mounted fireplaces electric. These include electric and ethanol. The right one for you will depend on your budget and the style of your home. If you decide to go with an electric or ethanol fireplace, you can be sure that it will bring warmth and class to your home. However, you must follow the manufacturer’s safety tips and remember to keep your family, friends and pets safe while using this fireplace.
Style
The design of a fireplace wall mount determines how it will look on your walls. Certain models are designed to stand out, while others blend into your room’s décor. For example, a modern model such as the Streamlined wall-mounted electric fireplace has a an elegant front glass face and a minimalist design. It features top venting that allows heated air to circulate smoothly while maintaining the stylish design of the fireplace. Its flat mount and easy-to-use remote make it easy to operate.
You can also find wall mounted electric fireplaces with more traditional-looking mantels. These units are perfect for homes that already have an open hearth, or who want to convert their fireplace that burns wood into an electric fire without a chimney. These fire places with flat walls come in different sizes and come with a shelf to display ornaments. They’re an excellent choice for living rooms, bedrooms and home offices.
A gas wall-mount fireplace is a good option for those looking to add a cozy, inviting vibe to their space. They come with a traditional log set and are available in various frame finishes such as natural stone and black. They also have an ember bed that is customizable and LED flame colors for a custom, personalized touch. Some models come with an integrated TV mount for additional functionality.
Certain models are designed to be mounted directly on the wall, while others can be recessed or completely into the wall. The Allusion wall-mount fireplace has a small footprint, which allows it to be recessing into 2×6 frame walls. You can, however, put a trim skirt on the exposed portion. The Allusion comes with a convenient remote and multiple heat settings so you can enjoy the fireplace all year round.
Surface-mounted electric fireplaces typically project 4″ to 6.5″ into the room, which makes them simpler to install than models that are built into the wall or built from the wall cavity. They’re also an excellent choice for tenants who don’t want have to deal with the hassle of drilling into their walls. When you move, you’ll be able to easily remove or reposition your fireplace.