How to Replace a Kia Sportage Replacement Key
For many kia rio key fob replacement models the key comes with a keyless entry system built-in. This key is similar to remote controls, and can be exchanged with an kia transponder key (new post from wiki.streampy.at) dealer.
Key fobs can stop working for several reasons, including batteries that are dead worn buttons signals, water damage, signal interference, and a defective receiver module. Here are some helpful tips to help you get your Kia sportage replacement key working once more.
How to replace the remote key or smartkey?
No matter if your Kia comes with an intelligent key, remote key push-to-start key, or a standard non-transponder key made of metal the battery in these keys will eventually require replacement. This is particularly true if the car displays a message telling that the smart or remote key has low battery power.
Luckily, this is quite simple to do. To replace the battery of the key fob remove the mechanical key from the slit on the back of the key fob and break the cover. Inside the key fob there will be a small screw that holds the battery in the correct position. By using a small screwdriver remove the screw and pull out the old battery. Then, you can insert the new battery and close the slit in the key fob.
Test the key fob by pressing the lock or unlock buttons. If the doors unlock and lock in the same way, you’re set! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or when you need to complete errands in Brandon.
Note: Some key fobs (transponder chip or smart keys) might require their programming done. This requires a programming machine that is only available to the locksmith for cars or dealer. Other keys (non transponder locked keys in kia soul made of steel) don’t require programming. If you’re looking to reprogramme your key, it is necessary to record the key code number on the key code tag.
How do you replace the battery?
If the Kia key fob does not respond when you press the lock/unlock button, it’s likely that the battery is not fully charged. A weak battery can cause other issues like the check engine light coming on or delayed cranking of the engine. It is relatively easy to replace the key fob batteries using just a few simple tools.
Before beginning the process, make sure that your vehicle is turned off and that all doors are closed. Find the small metal or plastic piece that is on the bottom of your key fob and play with it until a metallic key slides out. You can then insert the key into the handle on the door of your driver to open your car.
To replace the key fob battery, remove the cover at the rear and use a plastic bar tool to remove the latch holding the black negative battery cable. Remove the old battery and then position the new battery to ensure its “+” side faces you and the “-” negative side is facing the fob’s electrical contacts. Push the new CR2032 battery straight into position and avoid excessive force to avoid damaging or breaking the contacts made of metal.
After you have installed the new battery, turn the key fob for kia fob off and on in the ignition until the door locks cycle. You can then test the Kia’s Key fob again to make sure it’s functioning properly.
How do you replace the smart key kia key?
Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The smart key has an embedded mechanical key blade, while the standard keyfob does not. Both key fobs are equipped with a battery that will eventually require replacement. It’s quite simple and will take about two minutes.
Before you get started before you begin, ensure that you’re on a level surface with good lighting and that your Kia is not on. Remember that the fob is made up of small pieces that could be thrown off should you not be careful.
The small release button is located on the lower backside. This will either be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.
Once you have the key fob open then you can remove the old battery, and replace it. The new battery is CR-2032, and can be purchased from a local or online auto parts store. When you are done you should be able to lock, unlock and start your car using your key fob even if the engine isn’t running!
How to replace the mechanical key
The Kia keyfob can be a fantastic convenience that allows us to lock or unlock our car with just pressing the button. Like any other device there are issues with it occasionally. There are ways to resolve these issues and keep your key fobs functioning for the duration of.
One of the most frequent problems is a weak or dead battery. The fob could be able to stop working completely or to work intermittently. If this is the problem then replace the battery with a new one.
If this doesn’t solve the problem Try using a standard flathead screwdriver to open the fob’s plastic casing. Be careful not to damage any internal components or scratch the plastic. Once the battery is removed then replace it with a brand new battery.
Close and open the door using the mechanical key. (Every kia carens key fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to check that it’s functioning properly. If the fob isn’t working, call a dealer or locksmith to help resolve the issue. Make sure they make you an emergency key that functions in all the trunk and door cylinders, to avoid lockouts in the future.